I don't believe no. You should space it from the foam, the foam will insulate the back removing over half the heat-sinking potential.
Hugo
I don't believe no. You should space it from the foam, the foam will insulate the back removing over half the heat-sinking potential.
Hugo
Good point, I will come up with some sort of enclosure or something with air scoops hehe.
Hopefully they arrive soon so I can actually do some testing, I have so much stuff to do for this plane I feel like I will be lucky to have it flying in a month!
Any progress on this Hugo? VERY interested!
[FONT=Segoe UI]Regarding "some" peoples thoughts about Trappy and the FAA and "the sky is falling":[/FONT]
[FONT=Segoe UI][/FONT]
[FONT=Segoe UI]"Perspective. Time to recognize the root cause and not focus exclusively on a single case."
[/FONT]
Thinking about buying a couple of these and mounting the LED with its reflector on my airplane. Would still have to make my own driver circuit, but I'm pretty confident I can handle that.
http://www.amazon.com/Ultrafire-501b...ds=cree+xml+t6
[FONT=Segoe UI]Regarding "some" peoples thoughts about Trappy and the FAA and "the sky is falling":[/FONT]
[FONT=Segoe UI][/FONT]
[FONT=Segoe UI]"Perspective. Time to recognize the root cause and not focus exclusively on a single case."
[/FONT]
Hugo,
I am not so interested in the LED's, but would love to buy some drivers from you. Think you could come up with a kit for that, wouldn't mind soldering it together myself. Would also buy the LED's, but it would probably be hard to beat prices found on the internet. A driver kit should work well for you, couple small components in a bag, should be too much overhead. I'm just too lazy to track down all the componenents.
No rest till every single electron is properly accounted for....
I started the project features laydown:
RC controlled LED dimming (0-4A)
Button (lo/med/hi/off) if no rc channel is available.
Cycling main power quickly cycle trough (lo/med/hi/off) for flahlight modders.
Optional temperature sensor for LED protection.
Low voltage lipo protection
2-4S supply
1-4 LED load
Stackable architecture to control multiples strings with same channel/button.
-Hugo
I'll be interested if it won't be too expensive!
Don't steal, the government hates competition.
I'm looking at a 40$ retail price.
Hugo