Ok. I understand that part BUT...

My question IS...with the 2.3 jumper set up, can I THEN connect my main motor power battery which is a 4s6200 to the OSD (without frying it) so I can still see the mah usage in the OSD display?

Thanks!



Quote Originally Posted by HobbyWireless View Post
Hi,

Yes, by having the jumper on pin 2 and 3, the current sensor will no longer power the OSD and the power comes will be at the pin 1 and will not feed the OSD. But if you link the pin 1 and 2 using the jumper you will fry your OSD.

Cheers!