Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 40

Thread: cinemizer

  1. #21
    Navigator fireflyer451's Avatar
    Join Date
    Apr 2012
    Location
    Denver, CO
    Posts
    264
    I received my Cinemizer plus and goggles from Rob. And just tried them 'as is', they look beautiful. Goggles are slick too, as expected.

    Before I chop up the arms to get them into the goggles, has anyone used the Cinemizer sun shades? http://www.readymaderc.com/store/ind...oducts_id=1142

    And can you give an opinion about how well that works?

    Thanks

  2. #22
    Navigator gnrc's Avatar
    Join Date
    May 2013
    Posts
    606
    I just got mine as well.
    One thing that is odd though is that with the supplied rca to 3.5mm jack
    i only get video if i connect red to yellow and white to red on a 3.5mm to rca cable i normally use for my dvr
    and pull the plug out like 50% again and wiggle around a bit.

    Not sure if I mixed up the colors while resoldering the wires to the flat band adapter cable but I wrote it down before hand so I don't think so
    (forgott to check before modding them)
    Any ideas?

    What I wrote down color wise was having the connectors on the left and lower edge.
    Red Black Yellow Orange
    Purple Blue Green Brown

    Can anyone check?
    Last edited by gnrc; 20th November 2013 at 02:40 PM.

  3. #23
    Navigator FPV-PLASTICS's Avatar
    Join Date
    Sep 2011
    Posts
    469
    Hi

    Only 4 pole jack plug works
    Look out whit 3 pole jack
    You can hurt your cinemizer

    I sent new 4 pole jack to tulp

    Rob

  4. #24
    Navigator FPV-PLASTICS's Avatar
    Join Date
    Sep 2011
    Posts
    469
    One more thing

    All brands have difrent pin setting on jack
    There is no standaard

    Rob

  5. #25
    Navigator gnrc's Avatar
    Join Date
    May 2013
    Posts
    606
    Quote Originally Posted by FPV-PLASTICS View Post
    Hi

    Only 4 pole jack plug works
    Look out whit 3 pole jack
    You can hurt your cinemizer

    I sent new 4 pole jack to tulp

    Rob
    I am using the supplied 4 pole jack.
    It is just 3.5mm in diameter which I was refering to.

  6. #26
    Instructor Pilot appelm's Avatar
    Join Date
    Feb 2013
    Location
    Westchester, NY
    Posts
    2,351
    Quote Originally Posted by appelm View Post
    Here's a link to the quick guide for these goggles. One thing I learned: the multi-function switch can control brightness as well as volume and 3d/2d mode:

    http://cinemizer.zeiss.com/content/d...us_english.pdf
    On Page 10 of the quick guide above it shows the layout of the pins. I found that this pin layout is unique. The FatSharks for instance have pin 1 and 2 reversed I believe. I wanted to build my own cable that had a female RCA jack on one end. Using the quick guide, I was able to modify an existing cable I had to match that pin layout and its now working perfectly.
    youtube.com/user/Appelm1
    NEFPV.com

  7. #27
    Navigator gnrc's Avatar
    Join Date
    May 2013
    Posts
    606
    Quote Originally Posted by appelm View Post
    On Page 10 of the quick guide above it shows the layout of the pins. I found that this pin layout is unique. The FatSharks for instance have pin 1 and 2 reversed I believe. I wanted to build my own cable that had a female RCA jack on one end. Using the quick guide, I was able to modify an existing cable I had to match that pin layout and its now working perfectly.
    Thanks.
    Anyway it is working fine now.
    I think the plug into my dominators which I am using as a 5.8g rx right now was not plugged in completely.

    Everything is great, rob your amazing!

  8. #28
    Co-Pilot DiscoTuna's Avatar
    Join Date
    Jul 2013
    Posts
    1,893
    Thanks Rob! Mine have just arrived in Hong Kong. Struggling to get a 4 pole jack combo to work out of my existing lead spaghetti collection. Off to the components market now to cobble something together.

    A few questions
    (1) Has anyone found a link to the original manual (not the quick set up guide) - curious what the wheel and buttons are supposed to do.
    (2) quite fancy the idea of hooking them up to an ipad now and then for the kids - anyone come across a source of iphone connector kits?
    (3) I am trying to find out, what the audio slot does on the cinemizer box - if i say hook up an ipad / iphone will audio be available through head phones plugged in through that - this would help when i mod them to ski goggles and remove the audio arms on the CMs

  9. #29
    FPV - Fly Low airbagit13's Avatar
    Join Date
    Feb 2011
    Location
    Miami, FL
    Posts
    4,256
    Can someone take a picture of the pin that has to be removed to take the arms off? I can't seem to figure it out and am about to just snap them off or cut them off with a dremel tool.

    Thanks!
    FPV is not a crime!

    executiveprinters.com
    printingplusfl.com

  10. #30
    Is working on 12 projects Sicarius's Avatar
    Join Date
    Jun 2013
    Location
    NH, Netherlands
    Posts
    1,518
    They're hidden under the plastic front cover, which you can slightly bend forward, then you can stick something thin in there and push the rod out (cover is over both holes)
    Youtube username: SicariusMortus
    FPV NL

Similar Threads

  1. Headplay Liberator A/V mod
    By Nakelp86 in forum DIY
    Replies: 14
    Last Post: 28th February 2012, 10:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •