www.immersionrc.com

Results 1 to 3 of 3

Thread: EZUFH 2W power output issue

  1. #1
    Forum Member
    Join Date
    Sep 2015
    Posts
    4

    EZUFH 2W power output issue

    Hi,

    Could anyone please assist me with an issue.


    I have two EZUFH 2W transmitters which are flashed to the newest firmware 1.53 EzUHFFirmware_Tx2W.fw

    The tickbox is enabled for 2w power and to be operated via the toggle switch on the module. They are powered by an external LIPO.

    I have tested the power output using a power meter + 30db attenuator as recommended by the power meter instructions.

    On low power I measure only 25mw, mid power = 50mw and high = approx 119mw

    I take it there is an issue with both my transmitter modules or am I missing something?

    Thanks.

  2. #2
    Forum Member
    Join Date
    May 2013
    Location
    Australia
    Posts
    139
    What battery are you using

  3. #3
    Forum Member
    Join Date
    Sep 2015
    Posts
    4
    Not to worry. The tx module had failed and has been disposed of.

Similar Threads

  1. New 1.3 vtx no power output
    By mmarkcooper in forum Fatshark Support
    Replies: 1
    Last Post: 6th December 2015, 12:46 PM
  2. Vtx power output
    By mateusbonfadini in forum IFR - Video Link Discussion
    Replies: 10
    Last Post: 24th December 2014, 02:56 AM
  3. Vtx output power relationship to consumed power?
    By philthyy in forum Power Regulation / Power Distribution
    Replies: 44
    Last Post: 13th June 2014, 08:05 PM
  4. Replies: 11
    Last Post: 6th October 2013, 01:46 PM
  5. Power output for vtx's
    By Hucker in forum ImmersionRC
    Replies: 4
    Last Post: 10th May 2012, 04:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •