So here is the gist: Taranis X9D+, running 2.2.2, micro TX on 2.41. Started off ok, bound to it, updated the rx, and then it happened!

It would connect for a few seconds, then disconnect for a bit. Could not ever get it to hold. So I tried resetting by
>hold button during powerup >release >hold for 10s

Now it is in bind mode, but will not connect to my TX at all. I have tried rolling back software, changing the freq and anything else I could come up with. Does anyone have any other ideas? Support told me to downgrade and try, but it had no effect. Thanks!