I expose the problem with the telemetry of my CrossfireTX, I use firmware 2.41, Taranis X9E, opentx 2.2.0, the telemetry works correctly at 57600 baud before taking off the flight, in RFM2 screen without problems, as soon as the plane moves away no more of 200 more or less change to RFM1 is then when I do not receive the telemetry. Any telemetry receiver that uses warns of this cut, both EZgui (android), Mobile Flight (iOS) and also my homemade tracker antenna. This failure prevents me from using the telemetry completely, I do not know what is due if it is a fault of my own or, on the contrary, an error in the firmware. I await your help. Thank you