www.immersionrc.com

Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: Mojo 230 Issue

  1. #1
    Navigator
    Join Date
    Dec 2017
    Posts
    12

    Mojo 230 Issue

    Strange issue with my Mojo 230

    So it’s almost like airmode isn’t on because when I go to zero percent throttle I lose my inputs. But as soon as I add some throttle I regain control. Both in the OSD and BetaFlight it shows airmode is activated and when landing it does the “airmode bounce”

    I’m using a DX9 (Tried both the 250 and 150 file) The Mojo just came back from Horizon Hobby so they could check the drone and they said it tested fine.

    https://youtu.be/2J8ML3eRe8M

    The link above shows the what the issue looks like. First punch out I go to zero percent throttle and second one I make sure to keep some throttle.

    Any ideas?
    Last edited by Ryu8200; 26th February 2018 at 01:39 AM.

  2. #2
    Co-Pilot ImmersionRC Support's Avatar
    Join Date
    Apr 2016
    Posts
    1,943
    Hi you should do a txwizzard reset. Hook it up to the vortex configurator and press the txwizzard reset button.

  3. #3
    Navigator
    Join Date
    Dec 2017
    Posts
    12
    Quote Originally Posted by ImmersionRC Support View Post
    Hi you should do a txwizzard reset. Hook it up to the vortex configurator and press the txwizzard reset button.
    Already done that multiple times. Tried playing with my sub trim after the txwizzard as well thinking it was too long of a travel.

    So what’s the next idea?

  4. #4
    Heeeere we go DesJardins's Avatar
    Join Date
    Sep 2012
    Posts
    647
    Go into your receiver screen through BF and see what are all of your minimum’s, maximum’s are at as well as “stick min” and “stick max”

  5. #5
    Navigator
    Join Date
    Dec 2017
    Posts
    12
    This forum is not letting me post photos so here's link showing my min throttle reading which is showing 1000

    https://photos.app.goo.gl/G5OAn62rkosYE5IY2

  6. #6
    Navigator
    Join Date
    Dec 2017
    Posts
    12
    Here is my max throttle reading showing 2000

    https://photos.app.goo.gl/kRUwM8eTK9vYxMcY2

  7. #7
    Navigator
    Join Date
    Dec 2017
    Posts
    12
    Here is the "Travel" settings on my DX9 which is the Vortex 150.SPM file for the DX9 from Spektrum

    ALT =150/150
    ROL =150/150
    PIT = 150/150
    YAW = 144/144

    https://photos.app.goo.gl/jRbw41LOA2YD3Dc43

  8. #8
    Heeeere we go DesJardins's Avatar
    Join Date
    Sep 2012
    Posts
    647
    Check your minimum throttle in configuration as I had to bump mine up
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	317522DE-59C2-4908-804A-1DA839C72AA0.jpg 
Views:	45 
Size:	286.5 KB 
ID:	78208  

  9. #9
    Navigator
    Join Date
    Dec 2017
    Posts
    12
    Quote Originally Posted by DesJardins View Post
    Check your minimum throttle in configuration as I had to bump mine up
    Looks like your on the stock file and my Mojo is running the 3.2.2 BetaFlight file from Immersion. So I don't have the options like yours and my ESC Protocol is now running DSHOT600 and yours is on DSHOT125

    See link below for image

    https://photos.app.goo.gl/1fAXI9ZnKCtBiyEv1

  10. #10
    Heeeere we go DesJardins's Avatar
    Join Date
    Sep 2012
    Posts
    647
    Ahhh hang on! I’m running 3.2.2 as well so I may have snagged an old image

Similar Threads

  1. Vortex 230 Mojo Frsky Telemetry Issue
    By slowsword in forum ImmersionRC
    Replies: 11
    Last Post: 6th June 2018, 08:25 AM
  2. Mojo with RunCam OWL2 setup via Mojo OSD
    By roetty in forum Immersion Vortex Support
    Replies: 0
    Last Post: 18th February 2018, 05:35 AM
  3. Vortex Mojo 230 RunCam setup via Mojo OSD
    By roetty in forum OSDs & Flight Controllers
    Replies: 0
    Last Post: 17th February 2018, 04:03 AM
  4. Vortex 230 Mojo Issue
    By st0rm4g3ddon in forum Immersion Vortex Support
    Replies: 6
    Last Post: 5th January 2018, 02:16 PM
  5. Help with Mojo 230
    By adam4242 in forum ImmersionRC
    Replies: 3
    Last Post: 31st December 2017, 01:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •