www.immersionrc.com

Results 1 to 6 of 6

Thread: Vortex 150 batteries

  1. #1
    Navigator
    Join Date
    Feb 2016
    Location
    Mississippi
    Posts
    35

    Vortex 150 batteries

    When running at WOT and > 14 volts and around 25 amps my 150 starts to roll or yaw due to lack of battery power. Just wondering what batteries are being used before purchase? Thanks

  2. #2
    Heeeere we go DesJardins's Avatar
    Join Date
    Sep 2012
    Posts
    647
    Letís start by making sure youíre running airmode on the 150 as thatís a necessity.

    Next what C rating pack are you using? I made sure to run a 75C or higher as I was on the throttle hard in the 150.

    My personal choice were the Tattu 650mAh 75C
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	913CA933-0F98-43F5-A3F9-469507C13C4E.jpg 
Views:	48 
Size:	205.7 KB 
ID:	78038  

  3. #3
    Navigator
    Join Date
    Feb 2016
    Location
    Mississippi
    Posts
    35
    Im running 700mah 75c packs and air mode was off. Thanks.

  4. #4
    His Royal Sassiness ssassen's Avatar
    Join Date
    Feb 2011
    Location
    Netherlands
    Posts
    9,693
    Airmode needs to be on (preferably on a switch with arming) or you'll risk seeing a roll of death, this is a documented BF issue. You'll notice the default configuration after running the Tx wizard is Airmode on.
    Velvety smooth drone pilot for hire

  5. #5
    Navigator
    Join Date
    Feb 2016
    Location
    Mississippi
    Posts
    35
    For some reason air mode became disabled, I have configured to a switch so when acro is activated air mode is also.
    Thanks

  6. #6
    Navigator toffa's Avatar
    Join Date
    May 2017
    Posts
    73
    got all mine enabled through the osd airmode/on this will work the same sander will it not

Similar Threads

  1. Replies: 4
    Last Post: 28th June 2017, 10:27 PM
  2. Vortex- What batteries are everyone using?
    By IronRotor in forum ImmersionRC
    Replies: 31
    Last Post: 10th February 2016, 08:10 PM
  3. Vortex motor failure after tried 4S batteries
    By philwood in forum Immersion Vortex Support
    Replies: 9
    Last Post: 25th January 2016, 05:19 PM
  4. Vortex motor failure after tried 4S batteries
    By philwood in forum ImmersionRC Support
    Replies: 0
    Last Post: 28th December 2015, 09:07 AM
  5. Batteries Batteries Batteries are driving me Batty!
    By chris in forum Team-Black Sheep
    Replies: 16
    Last Post: 18th February 2015, 06:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •