Results 1 to 2 of 2

Thread: Dominator HD2 cropped image

  1. #1
    Navigator IceWind's Avatar
    Join Date
    Jul 2011
    Location
    Ireland & Portugal
    Posts
    372

    Dominator HD2 cropped image

    Hey,

    I don't use much OSD's or similar stuff so I hadn't noticed this before.
    I was adding a call-sign in my CCD (HS1177) for easier video identification and noticed that my HD2 are cropping quite a bit the image, at the top and bottom.

    So as a test I add the word "TEST" on the lower left corner of the CCD.
    Click image for larger version. 

Name:	CCD-Image.jpg 
Views:	47 
Size:	75.7 KB 
ID:	77155
    This is the image of the CCD directly connected to a video capture card, the text is clearly visible in the corner.

    But this is what I see in the HD2 goggles when receiving the same video signal.
    Click image for larger version. 

Name:	FatShark-DOM_HD2.jpg 
Views:	51 
Size:	62.1 KB 
ID:	77158
    It's not easy to take a clear photo but only the top bit of the text is visible, as well as I didn't moved the CCD and the top part of the image is slightly cropped as well.

    At first I thought it could be the vTX but when checking the HD2 DVR recording it shows fine, well there is some minor cropping on the left but is minimal
    Click image for larger version. 

Name:	DVR-Image.png 
Views:	56 
Size:	283.9 KB 
ID:	77156

    And to furher test I used my old RCV922 and it also shows correctly.
    Click image for larger version. 

Name:	FatShark-RCV922.jpg 
Views:	48 
Size:	89.8 KB 
ID:	77157
    Full text is clearly visible.

    (Btw, for thus test I was using the Tramp HV vTX but as seen in the DVR that is not the problem.)
    So it seems the video in the LCD's is getting cropped.

    There isn't afaik any settings the goggles to adjust the image, so can this be a problem with the goggles itself?

    Cheers
    www. xRotor .net | 0x0FPV00
    youtube.com/Nandox7

  2. #2
    Navigator IceWind's Avatar
    Join Date
    Jul 2011
    Location
    Ireland & Portugal
    Posts
    372
    bump...

    Any answer to this.
    New FC, new OSD , same issue...
    Click image for larger version. 

Name:	Fatsha5k_HD2_cropped_image.jpg 
Views:	20 
Size:	176.4 KB 
ID:	77906
    www. xRotor .net | 0x0FPV00
    youtube.com/Nandox7

Similar Threads

  1. B&W image on FS Dominator v3
    By Nakelp86 in forum Fatshark Support
    Replies: 0
    Last Post: 13th March 2016, 09:05 PM
  2. New Dominator V3 image pixelated
    By TheHunter in forum Fatshark Support
    Replies: 6
    Last Post: 10th January 2016, 07:39 PM
  3. Dominator V2 image ghosting
    By Boarchild in forum Fatshark Support
    Replies: 1
    Last Post: 4th August 2015, 12:08 AM
  4. Dominator V2 Image Question
    By TWT in forum Fat Shark R/C Vision Systems
    Replies: 4
    Last Post: 6th April 2015, 07:05 AM
  5. Video doesnt fit screen (CROPPED) of Fatshark Dominator
    By bazaar in forum Fat Shark R/C Vision Systems
    Replies: 7
    Last Post: 8th August 2014, 05:21 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •