www.immersionrc.com

Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Vortex 285 beta flight issue

  1. #1
    Forum Member
    Join Date
    Feb 2017
    Posts
    76

    Vortex 285 beta flight issue

    So I get to beta flight and when I try to flash the beta flight firmware it says communication with bootloader failed. I've had this issue before but never when flashing? I have the ports server installed for the stm32. Please what am I doing wrong?

    Begginer in Fpv But Rc Hobbiest Since Birth😉

  2. #2
    Forum Member
    Join Date
    Apr 2016
    Posts
    1,943
    If it is at the verifying part then you are fine it will be flashed.

  3. #3
    Forum Member
    Join Date
    Feb 2017
    Posts
    76
    I got past all this I got through tx wizard now I'm set tuning my pids

    Begginer in Fpv But Rc Hobbiest Since Birth😉

  4. #4
    Forum Member
    Join Date
    Apr 2016
    Posts
    1,943
    Good, it can be a bit overwhelming sometimes.

  5. #5
    Forum Member
    Join Date
    Feb 2017
    Posts
    76
    Yeah sure can

    Begginer in Fpv But Rc Hobbiest Since Birth😉

  6. #6
    Forum Member
    Join Date
    Feb 2011
    Location
    Netherlands
    Posts
    9,693
    Quote Originally Posted by RecklessFpv View Post
    I got past all this I got through tx wizard now I'm set tuning my pids

    Begginer in Fpv But Rc Hobbiest Since Birth
    You don't need to tune the PIDs, the stock tune on the latest firmware upgrade is the best you'll see on this quad. And considering your difficulty getting it set up I would suggest staying away from PID tuning, or you'll be opening up a whole new can of worms I'm afraid.
    Velvety smooth drone pilot for hire

  7. #7
    Forum Member
    Join Date
    Feb 2017
    Posts
    76
    Ok I won't touch them just seems wierd it starts shaking in horizon if there's just even the smallest little breeze it starts to ossolate

    Begginer in Fpv But Rc Hobbiest Since Birth😉

  8. #8
    Forum Member
    Join Date
    Apr 2016
    Posts
    1,943
    Learn to fly acro asap you'll do yourself a big favour. And once you get the hang of it you don't understand how you could ever fly stabelised.

  9. #9
    Forum Member
    Join Date
    Feb 2017
    Posts
    76
    I don't like acro lol its to hard for me

    Begginer in Fpv But Rc Hobbiest Since Birth😉

  10. #10
    Forum Member
    Join Date
    Dec 2011
    Location
    PNW USA
    Posts
    3,412
    What kind of battery are you running? A 3S bigger batt will tame it down quite a bit.

Similar Threads

  1. Beta flight configuration
    By CaCondor in forum ROTORCRAFT
    Replies: 0
    Last Post: 22nd October 2016, 11:45 AM
  2. 250 pro and new beta firmware issue
    By Deemus in forum Immersion Vortex Support
    Replies: 24
    Last Post: 3rd June 2016, 07:14 PM
  3. Replies: 2
    Last Post: 17th March 2016, 03:45 PM
  4. Replies: 31
    Last Post: 22nd July 2015, 11:06 AM
  5. Nexwave Beta Bands RX range issue
    By Giulio in forum Fat Shark R/C Vision Systems
    Replies: 12
    Last Post: 14th May 2015, 05:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •