www.immersionrc.com

Results 1 to 1 of 1

Thread: Vortex 150 cam settings + no cam osd

  1. #1
    Co-Pilot ImmersionRC Support's Avatar
    Join Date
    Apr 2016
    Posts
    1,943

    Vortex 150 cam settings + no cam osd

    These are some nice settings for the 150 cam:
    Take note that you need to reset your camera to defaults first as to make sure you start from a clean slate.

    Also, the gamma setting in the LCD sub menu is really up to preference and weather conditions as well as the brightness/contrast/color settings on the LCD screen/goggles you use.

    Main menu:
    DAY&NIGHT: COLOR

    LENS menu:
    BRIGHTNESS : 050

    EXPOSURE menu:
    DWDR : ON
    AGC : OFF

    SPECIAL > IMAGE ADJ. menu:
    CONTRAST : 100 -130 (adjust so your whites are white)
    SHARPNESS : 031
    2DNR : OFF
    DISPLAY : LCD

    SPECIAL > IMAGE ADJ. > LCD menu:
    GAMMA : 0.40

    If you can't acces your camera OSD
    you need to tweak your osd button voltages. You can find this setting on the second page of the osd under advanced settings. These settings should get you close:

    Default levels for FS Race CAM FPV< OSD 1.0.0.39 >= OSD 1.0.0.39
    Select 1625 mV - 1650 mV
    Up 775 mV -775 mV
    Down 0 mV -0 mV
    Left 1200 mV -1215 mV
    Right 400 mV - 385 mV
    Last edited by ImmersionRC Support; 10th May 2017 at 02:34 AM.

Similar Threads

  1. Replies: 24
    Last Post: 8th May 2017, 03:25 PM
  2. Vortex 250 tx power settings
    By James d in forum Immersion Vortex Support
    Replies: 0
    Last Post: 25th October 2016, 04:20 PM
  3. Vortex 285 will not store settings
    By wmwmson in forum Immersion Vortex Support
    Replies: 3
    Last Post: 10th September 2016, 04:16 AM
  4. Vortex Failsafe Settings
    By wbefield in forum ImmersionRC
    Replies: 7
    Last Post: 8th October 2015, 12:40 PM
  5. Replies: 1
    Last Post: 8th October 2015, 12:10 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •