www.immersionrc.com

Results 1 to 8 of 8

Thread: Vortex 250 Sbus & Team Black Sheep Micro RX cable

  1. #1
    Navigator
    Join Date
    Jan 2017
    Posts
    11

    Vortex 250 Sbus & Team Black Sheep Micro RX cable

    Hello.

    What are the SBUS pin outs on the Vortex 250 Pro UmmaGawrd edition port please?

    Its so I can connect the Vortex sbus it to a TBS Micros Rx

    > I have a sbus cable from my D4R-II with the correct Vortex pico plug
    > It looks like the pin out colours do not map correctly to the TBS micro Rx (grd, pwr, sig) hence don't want to power-up
    > The sbus pin outs are marked on the TBS Rx, and NOT marked on the Vortex or in the manual

  2. #2
    Co-Pilot ImmersionRC Support's Avatar
    Join Date
    Apr 2016
    Posts
    1,943
    If you use the original sbus to Rx cable black is ground red is power and white is signal.

  3. #3
    Navigator
    Join Date
    Jan 2017
    Posts
    11
    Still lost sorry, what are the pin-outs on the Vortex SBUS side?

    See the yellow-highlighted text in the below picture

    If the pictures is too small, I have from the port (left) side of the Vortex SBUS the following

    Pin 1 = 5V Power (red)
    Pin 2 = blank (not used)
    Pin 3 = Ground (black)
    Pin 4 = Signal (white)

    Is this correct?

    Click image for larger version. 

Name:	Vortex SBUS pin-outs to TBS Rx.jpeg 
Views:	59 
Size:	133.5 KB 
ID:	75835

  4. #4
    Co-Pilot ImmersionRC Support's Avatar
    Join Date
    Apr 2016
    Posts
    1,943
    I will have to check that tonight at home. But why don't you take the original sbus cable that came with the vortex that will show you the pinout.

  5. #5
    Navigator
    Join Date
    Jan 2017
    Posts
    11
    Cool, thanks. I didn't receive an sbus cable with my Vortex when it arrived :-( the sbus cable I have came with a DR4-II.

  6. #6
    Navigator
    Join Date
    Jan 2017
    Posts
    11
    Hi team, any update on the Vortex sbus pin outs?

  7. #7
    Co-Pilot ImmersionRC Support's Avatar
    Join Date
    Apr 2016
    Posts
    1,943
    We are missing posts here. Just to be sure you already had this question answered by ted_b right?

  8. #8
    Navigator
    Join Date
    Jan 2017
    Posts
    11
    Yes, all sorted, after having the correct S-Bus cable step c.iii was causing the issue

    For SBUS on Vortex 250 with Team Black Sheep Micro RX and Crossfire
    a. Plug Micro Rx into Vortex SBUS port. Note pin outs on the Vortex are, from starboard side: Signal/Ground/nil/5V Power
    b. Power up Vortex and make sure Micro Rx is bound, green light on Rx and Crossfire
    c. On Crossfire,
    i. Long press menu stick
    ii. Select "Rx Micro v2 > Output map"
    iii. Select "Output 1 = SBUS"
    iv. Left press menu stick to exit
    d. In Cleanflight, on "Receiver" tab, scroll to "Receiver Mode" and select "RX_Serial". Then on the "Configuration" tab, select "Save and Reboot", then select disconnect
    e. Un-plug and re-plug power on Vortex (with USB disconnect)

Similar Threads

  1. Team black sheep cores???
    By Powerfulsteve in forum FAQs
    Replies: 11
    Last Post: 3rd January 2016, 09:17 AM
  2. Team Black Sheep 1 - DJI Phantom 0
    By hoppy65 in forum Team-Black Sheep
    Replies: 1
    Last Post: 4th September 2014, 03:35 PM
  3. What are shipping times from Team Black Sheep to USA?
    By odin14 in forum Team-Black Sheep
    Replies: 7
    Last Post: 20th November 2013, 09:43 PM
  4. Team Black Sheep T-Shirts
    By MrBob6939 in forum Team-Black Sheep
    Replies: 48
    Last Post: 7th November 2013, 11:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •