ReadyMadeRC!

Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: 1.3GHz 400mW VS 1.3 Ghz 800mW Transmiters

  1. #11
    Engineer for Jesus Christ IBCrazy's Avatar
    Join Date
    Mar 2011
    Location
    Amherst, VA
    Posts
    7,352
    I had a 200mW video transmitter poop out after 3/4 of a mile. Of course when I landed and tested it, I found it was putting out just 2mW...

    The 400mW units have been the most solid I have used so far... this coming from a man with an 87 video transmitter kill count... it is depressing.

    As for filters, I'd run a cheap notch filter: http://www.getfpv.com/catalogsearch/...q=notch+filter

    Antennas: A Blue beam Ultra set will go much farther than your control can go. A cheaper option which will still take you several miles is a BlueBeam whip antenna set: https://www.readymaderc.com/store/in...oducts_id=3175

    -Alex
    If it is broken, fix it. if it isn't broken, I'll soon fix that.

    videoaerialsystems.com - Performance video piloting

  2. #12
    Like that convo, hitting my quad's limit on TX range is always a worry...even tho it's supposed to slowly cut throttle. I didn't know you could use 1.3 gig anymore, especially not down in high Meg. Hate hate hate the 5.8 (a limb! Really?)and am scared of the 2.3.

Similar Threads

  1. 1.3Ghz 400mW or 800mW
    By Frede in forum PILOT'S LAB
    Replies: 23
    Last Post: 30th December 2014, 02:13 PM
  2. BEVRC 1.3Ghz 400mw TX/RX?
    By mipi in forum IFR - Video Link Discussion
    Replies: 18
    Last Post: 5th May 2014, 08:01 AM
  3. 1.3ghz 400mW vs. 2.4 800mW - Which to choose?
    By Howzit in forum IFR - Video Link Discussion
    Replies: 27
    Last Post: 12th April 2014, 03:54 PM
  4. 400mw 1,3ghz vtx or 800mw?
    By defuncta in forum IFR - Video Link Discussion
    Replies: 6
    Last Post: 11th November 2013, 11:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •