www.immersionrc.com

Results 1 to 1 of 1

Thread: UPDATED How to flash your Vortex and issues READ THIS FIRST!!!!

  1. #1
    Co-Pilot ImmersionRC Support's Avatar
    Join Date
    Apr 2016
    Posts
    1,943

    UPDATED How to flash your Vortex and issues READ THIS FIRST!!!!

    Install the vortex-configurator chrome application https://chrome.google.com/webstore/d...ihdojjdjphdeog and install the drivers .

    Always use the the firmware package downloaded from the immersionrc website for your version of the vortex. Our firmware packages always come with both FC and OSD firmware. They are a pair and need to flashed together.

    To flash the latest fimware version to your vortex you need to use vortex configurator, then proceed as follows:



    • ​Plug USB
    • Plug USB OFF and On again
    • Plug LiPo
    • Wait 10 seconds
    • Start vortex configurator
    • Select right COM port
    • Click flash firmware
    • Select osd firmware you previously downloaded
    • Flashing will start
    • Disconnect usb and powercycle the qaud
    • Plug in usb again
    • Click flash firmware
    • Select the dowloaded betaflight version
    • Flashing will start
    • If you get an "STM32 - timed out, programming: FAILED" error that's not an issue. It happens a lot but your quad will still be flashed to the latest version
    • Power cycle the quad, run the txwizzard and finish it
    • Power cycle again
    • Now you can connect it to betaflight configurator to setup your switches and other options you want.


    Happy flying
    Last edited by ImmersionRC Support; 10th May 2017 at 02:51 AM.

Similar Threads

  1. Join Us-To be Our RC Car driver &FPV pilot
    By RCAmy in forum GensAce
    Replies: 0
    Last Post: 22nd February 2016, 04:09 AM
  2. Replies: 5
    Last Post: 2nd July 2015, 10:21 AM
  3. ImmersionRC OSD driver problem
    By n6nev in forum RC TECH
    Replies: 0
    Last Post: 7th March 2013, 08:37 PM
  4. Read the buyer comments, seriously read them....
    By ECUAdam in forum OFF-TOPIC
    Replies: 6
    Last Post: 21st February 2013, 08:54 AM
  5. Driver installation problem
    By pesbra in forum ImmersionRC
    Replies: 0
    Last Post: 20th April 2012, 11:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •