Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20

Thread: Antenna Tracker withoutt audio channel

  1. #11
    Navigator
    Join Date
    Nov 2016
    Location
    Rome - Italy
    Posts
    5
    Hello, I ask again:when?????
    Please don't leave your customers without an answer, it is not good for you.
    We are waiting from july, you said that in a couple of days the firmware to support this feature should has been released;
    a half year has passed.......!!!!!!!
    Last edited by alex998r; 22nd December 2016 at 08:37 AM.

  2. #12
    'avagoodweegend Heppy Ket's Avatar
    Join Date
    Jan 2014
    Location
    Adelaide, South Australia
    Posts
    323
    Out testing Jase;s latest RSSI antenna tracker with a software tweak, working very well in a known WiFi contaminated environment on 5.8g
    www.youtube.com/watch?v=_YVkHTOQMTk
    The shop
    http://ilovetoflyfpv.com/antenna_tracker_rssi_v2.html

  3. #13
    'avagoodweegend Heppy Ket's Avatar
    Join Date
    Jan 2014
    Location
    Adelaide, South Australia
    Posts
    323
    A distance test for the ILovetoflyFPV RSSI antenna tracker this time, out to 10km. 400mw Boscam 5.8g vtx.

    The shop
    http://ilovetoflyfpv.com/antenna_tracker_rssi_v2.html

  4. #14
    Quote Originally Posted by alex998r View Post
    Hello, I ask again:when?????
    Please don't leave your customers without an answer, it is not good for you.
    We are waiting from july, you said that in a couple of days the firmware to support this feature should has been released;
    a half year has passed.......!!!!!!!
    Sorry for the trouble
    The firmware that we release in April support the feature
    We sent the email to Flytop and tell them how to connect the AAT ,
    but didn't share the method for who have the same needs in here



    Quote Originally Posted by skylark View Post
    Just try the new firmware (Support extend GPS and Datalink)
    AAT firmware
    Last edited by skylark; 27th December 2016 at 08:41 AM.
    Skylark FPV Service Center
    http://www.skylarkfpv.com

  5. #15

    We added an 4Pin connector in AAT module, you can use it connect AAT USART port
    The AAT have two USART port, they are the same function.
    The only difference is the USART in AAT power module that does't output 5V power




    Then connect the AAT mudule with your Data Link to read the GPS signal.
    The AAT will track your device that is carrying the GPS
    Last edited by skylark; 26th December 2016 at 11:27 PM.
    Skylark FPV Service Center
    http://www.skylarkfpv.com

  6. #16
    If you don't want to use Skylark AAT module, you can also use your device to control the AAT by AAT API
    http://fpvlab.com/forums/showthread....l=1#post792857
    Last edited by skylark; 27th December 2016 at 08:39 AM.
    Skylark FPV Service Center
    http://www.skylarkfpv.com

  7. #17
    Could this also work with any device sending back the nmea data? I have the dragonlink control system and it can send back the gps data in telemetry and this is how I would love to control my aat
    Most of the money I made this year I spent on FPV,the rest I just wasted.

  8. #18
    Yes, just set your data link to the same baud rate as in your GPS
    Last edited by skylark; 27th December 2016 at 06:38 PM.
    Skylark FPV Service Center
    http://www.skylarkfpv.com

  9. #19
    So have not had a chance to try this yet but wanted to ask a few questions for clarification. Do we need to use the new aat convert module for this or can we hook a data stream to the gps side of the old convert module and the other side into the tracker.Can this read mavlink telemtry data to get the coordinate information or can it only read nmea data? If only nmea data what format does it need to be in ?
    Most of the money I made this year I spent on FPV,the rest I just wasted.

  10. #20
    It read NMEA data signal, thr format like this one
    $GPRMC,014815.656,A,4736.5833,N,12221.0033,W,0.0,0 ,180412,003.1,W*72
    $GPGGA,011236.906,4736.5833,N,12221.0033,W,1,07,0. 9,300,M,0,M,,*7C

    And cannot work with mavlink telemtry data now, we will support it in future
    Skylark FPV Service Center
    http://www.skylarkfpv.com

Similar Threads

  1. Getting EzOSD noise through audio channel
    By Radius in forum IFR - Video Link Discussion
    Replies: 6
    Last Post: 2nd April 2015, 08:39 PM
  2. Replies: 1
    Last Post: 16th September 2013, 08:30 PM
  3. Antenna tracker audio level
    By FinalFrag in forum ImmersionRC
    Replies: 7
    Last Post: 19th August 2013, 02:15 PM
  4. Do you ground your audio channel?
    By BloomingtonFPV in forum RC TECH
    Replies: 3
    Last Post: 6th September 2012, 12:13 AM
  5. Audio Levels issue on Antenna Tracker
    By deviant in forum ImmersionRC
    Replies: 19
    Last Post: 3rd September 2012, 10:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •