Results 1 to 2 of 2

Thread: servo y connector for camera pan and tilt

  1. #1
    Forum Member
    Join Date
    Apr 2016

    servo y connector for camera pan and tilt

    the pan and tilt uses two servo connectors. is it possible to use a y connector and then use mixing on the radio to make things work?

  2. #2
    Forum Member
    Join Date
    Nov 2014
    Down Under
    No, when using a Y-connector you basically joined the two servos together, whatever mixing you do, they will both do the same thing. That's assuming the two connected servos are of similar type.

    In the case of digital (programmable) servos, you can restrict one more than the other in travel, or change the speed and/or direction but they will always get the same pulse input.

Similar Threads

  1. Tilt servo
    By PB4 in forum ImmersionRC
    Replies: 6
    Last Post: 15th September 2015, 12:01 AM
  2. Camera tilt via servo / Goggles suggestions
    By john555 in forum Flight Camera Talk
    Replies: 0
    Last Post: 21st June 2015, 05:25 PM
  3. Fat Shark 3-Axis Pan/Tilt/Roll FPV Camera Mount MG servo replacement
    By Faffer in forum Fat Shark R/C Vision Systems
    Replies: 9
    Last Post: 6th June 2015, 06:37 AM
  4. Need pan&tilt for GoPro 1 and 270 servo.
    By zaGURUinzaSKY in forum Flight Camera Talk
    Replies: 10
    Last Post: 2nd December 2014, 03:02 AM
  5. Best Servo choice for Pan and Tilt
    By gauravag in forum RC TECH
    Replies: 4
    Last Post: 22nd November 2012, 08:12 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts