image
Results 1 to 2 of 2

Thread: quanum q 2d gimbal help please

  1. #1
    Navigator
    Join Date
    Dec 2014
    Posts
    38

    quanum q 2d gimbal help please

    hi everyone i am using the quaum q2d gimbal, i have followed the crapy instuctions on how to set it up but for some reason it still doesnt work properly.
    the dial i use to turn the gimbal i cant get it to be in the middle set at zero so the camera is looking forward. also when i turn the camera to face down at the ground i only have to turn it a tiny bit but it will go way past 90 deg down and face almost behind itself how do i set the parameters of how far?
    also if i attach the fpv lead out of the turnigy hd camera (like a gopro) it twitches alot, i had to cut the black cover of the lead and just have the exposed thin leads for it to work what am i doing wrong?
    i would like to have it so the dial at zero is centre (so the camera if facing forward) and when i turn anti clock fully the camera only goes to straight down is this possible
    cheers

  2. #2
    Navigator
    Join Date
    Jan 2018
    Posts
    1
    Hi did you resolve this problem as i have purchased quanum 3d gimble and have similar problem can you help
    Regards

Similar Threads

  1. quanum nova g-osd help please
    By gainey in forum OSDs & Flight Controllers
    Replies: 0
    Last Post: 3rd November 2015, 03:34 AM
  2. Quanum Nova circle mode help
    By gainey in forum ROTORCRAFT
    Replies: 0
    Last Post: 30th August 2015, 03:28 AM
  3. Quanum DIY FPV goggles mods :) (Improvements)
    By albeagle007 in forum DIY
    Replies: 19
    Last Post: 12th August 2015, 11:33 AM
  4. DIY Goggles Issue - Quanum / Boscam.
    By Buzzin' Free in forum RC TECH
    Replies: 9
    Last Post: 30th May 2015, 07:51 PM
  5. DIY Quanum helmet
    By nsjames in forum Ground Stations...
    Replies: 2
    Last Post: 18th March 2015, 12:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •