image
Page 404 of 404 FirstFirst ... 304354394402403404
Results 4,031 to 4,036 of 4036

Thread: MWOSD - for BETAFLIGHT CLEANFLIGHT RACEFLIGHT PIXHAWK KISS DRONIN INAV and others

  1. #4031
    Do you have arming on a switch ? IF so - is it the same channel as in the layout tab? Maybe it is changing to a blank screen layout.
    *** Still flying up my own arse ***

  2. #4032
    Navigator
    Join Date
    Jun 2019
    Posts
    1
    Hello! I faced the problem of Aeromax OSD firmware. Error: programming error: 3020 sending: timeout receiving data after 400 MS!If you just connect the osd then the connection is but to flash I can't. What to do?

  3. #4033
    Quote Originally Posted by flyfx View Post
    Hello! I faced the problem of Aeromax OSD firmware. Error: programming error: 3020 sending: timeout receiving data after 400 MS!If you just connect the osd then the connection is but to flash I can't. What to do?
    Hi, check FAQ #1 - https://github.com/ShikOfTheRa/scarab-osd/wiki/FAQ

    1 Unable to flash and I get "Programming FAILED: sending 3020"

    • 99% of time this is connectivity or power issue
    • Check you are selecting the correct comm port
    • TX of OSD must connect to RX of programmer
    • RX of OSD must connect to TX of programmer
    • Programmer requires all six pins connected
    • Nothing else must power the OSD when programming. Only the USB programmer
    *** Still flying up my own arse ***

  4. #4034
    Hi hope someone can help. Just set up MWOSD after realising it now works with Ardupilot. Previously I was using Minimosd extra which mostly worked but is not actively being developed and the fonts were causing me problems.
    The main problem with MWOSD is that the modes don't show correctly. The documentation says that this is due to either selecting the wrong firmware or aircraft type. My problem is I'm using a plane in VTOL configuration so I don't know whether to select multicopter or fixed wing. Either way the modes aren't correct because on a VTOL they are a mix of both multicopter and fixed wing modes. The modes worked ok on minim osd extra because you didn't have to select between type of craft. I've checked faq and searched this forum and can't find any hits for "VTOL"? Maybe it's not supported?
    My other problem is RSSI showing 100% all the time (again worked on minim osd extra) but I've done a search on here and have found references to the scaling which may mean I need to recalibrate the range. Need to look into this.......

  5. #4035
    Hi, sorry for delay - been away for a few weeks so sorry for late answer.

    Have not been asked for VTOL before! - the only real OSD difference between multirotor and fixedwing (and VTOL) is the display of modes.
    For VTOL it looks like I need to add a few extra modes in there for you.

    These appear to be in minim OSD-extra and easy to add:


    These are not in minim OSD-extra and will take a bit more memory – are they used?

    *** Still flying up my own arse ***

  6. #4036
    All 6 VTOL modes above added.

    It is available as test release 1.9.1.4
    Will need to tick "show test release" in gui when flashing


    FAQ updated:

    5 Is there support for VTOL
    * VTOL is supported for APM from 1.9.1.4 onward. Select aircraft type = FIXEDWING
    *** Still flying up my own arse ***

Page 404 of 404 FirstFirst ... 304354394402403404

Similar Threads

  1. Why won't baseflight connect on my Mac ?
    By Sortie72 in forum OSDs & Flight Controllers
    Replies: 45
    Last Post: 24th November 2015, 02:14 AM
  2. TBS DiscoPro + MultiWii (Baseflight on Naze32) PID regulation
    By Asurendra in forum OSDs & Flight Controllers
    Replies: 10
    Last Post: 7th January 2015, 02:41 PM
  3. 400Q Specific Baseflight firmware for Naze32
    By chatch in forum REALFPV.COM
    Replies: 72
    Last Post: 29th April 2014, 08:41 AM
  4. HELP GUYS LIKE ME THAT REALLY WANT TO CROSS OVER TO NAZE32/MULTIWII
    By Bigjack in forum OSDs & Flight Controllers
    Replies: 28
    Last Post: 28th February 2014, 02:22 AM
  5. need help multiwii pro
    By florinb31 in forum OSDs & Flight Controllers
    Replies: 2
    Last Post: 23rd May 2013, 12:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •