Page 115 of 119 FirstFirst ... 1565105113114115116117 ... LastLast
Results 1,141 to 1,150 of 1183

Thread: TBS DISCOVERY (PRO): endurance / long range

  1. #1141
    Navigator
    Join Date
    Jul 2014
    Posts
    47
    It's the same as the dji arms! On the top plate they mount with 4 bolts. They give the strength and the 2 standoffs are just to hold the bottom plate in place!


    Verzonden vanaf mijn iPhone met Tapatalk

  2. #1142
    Navigator
    Join Date
    Jul 2014
    Posts
    47
    Well this sucks, i've ordered the expensive set that states: comes with 2 sets of fittings for custom height setup!

    Because I fly the PRO I'm not able to use the higher standoffs! The gimball screws to both plates! But the normal size standoffs are not supplied! As some of you stated before! I'm talking on the live chat right now!

    To be continued!


    Verzonden vanaf mijn iPhone met Tapatalk

  3. #1143
    Navigator
    Join Date
    Jul 2014
    Posts
    47
    Well this sucks, i've ordered the expensive set that states: comes with 2 sets of fittings for custom height setup!

    Because I fly the PRO I'm not able to use the higher standoffs! The gimball screws to both plates! But the normal size standoffs are not supplied! As some of you stated before! I'm talking on the live chat right now!

    To be continued!


    Verzonden vanaf mijn iPhone met Tapatalk

  4. #1144
    Navigator
    Join Date
    Jul 2014
    Posts
    47
    So for now some other little information:

    This is a standard flamewheelarm: I fly them with a little 3d printed leg to raise the landing height


    And next the folding arm with the 2 long standoffs! As you can see! Exactly the same weight!! Nice



    Verzonden vanaf mijn iPhone met Tapatalk

  5. #1145
    Navigator
    Join Date
    May 2016
    Posts
    14
    Quote Originally Posted by misterx View Post
    Well this sucks, i've ordered the expensive set that states: comes with 2 sets of fittings for custom height setup!

    Because I fly the PRO I'm not able to use the higher standoffs! The gimball screws to both plates! But the normal size standoffs are not supplied! As some of you stated before! I'm talking on the live chat right now!

    To be continued!


    Verzonden vanaf mijn iPhone met Tapatalk

    You've done the same as me!

    Hobbyking made it read as if you get two different heights of standoff. F*cking HK!

    I've ordered another set of the arms with standard height standoffs. I cant get a good tune on the folding armed disco as yet. So its been retired until the rest of the kit shows up and I can get the gains on the tx.

    EDIT:

    Ah and while im here.

    My Disco gets this mad wobble at high altitudes. If you skip to the 0:50 mark in this video you'll see what I mean. There's two points where it also ends up being spun around quite violently. Apart from the occasional mad wobble it flies great.

    https://youtu.be/5G6M6Bvq5vY
    Last edited by Preid; 6th June 2016 at 11:11 AM.

  6. #1146
    Navigator STI-REX's Avatar
    Join Date
    Aug 2012
    Location
    Cambridge ,New Zealand
    Posts
    305
    Video link comes up as private video on youtube
    4 wheels moving body 2 wheels moving soul

  7. #1147
    Navigator
    Join Date
    May 2016
    Posts
    14
    Quote Originally Posted by STI-REX View Post
    Video link comes up as private video on youtube
    Whoops, rectified that.

  8. #1148
    Navigator STI-REX's Avatar
    Join Date
    Aug 2012
    Location
    Cambridge ,New Zealand
    Posts
    305
    Quote Originally Posted by Preid View Post
    Whoops, rectified that.
    Video still shows as private for me
    4 wheels moving body 2 wheels moving soul

  9. #1149
    Navigator
    Join Date
    May 2016
    Posts
    14
    Quote Originally Posted by STI-REX View Post
    Video still shows as private for me


    That took me a good ten minutes to figure out.


    This wobbling and mad yaw 180 degree spins only happen above the clouds. My ecs's are all calibrated, props balanced and I was running a 3300mah 3S setup so not exactly heavy. It has the yaw wobble issue that seems to be a common disco thing. Which is comes out under hard yaw which I rarely do.

    Any idea's welcomed.

    Misterx, have you got the legs installed yet!?

  10. #1150
    Navigator
    Join Date
    Jul 2014
    Posts
    47
    Nope, i've got the problem of the high standoffs. I've recieved a $20 refund and decided to buy another alu set with the correct spacers. I'll resell the alu arms with the long standoffs later. I hope to place them on wednesday. I'll report!


    Verzonden vanaf mijn iPhone met Tapatalk

Similar Threads

  1. Which 1.3vtx for long range endurance disco?
    By 3din in forum Team-Black Sheep
    Replies: 10
    Last Post: 29th August 2014, 10:26 AM
  2. out of stock -- TBS DISCOVERY PRO Long Range
    By ioshua in forum Team-Black Sheep
    Replies: 3
    Last Post: 23rd June 2014, 09:14 AM
  3. Discovery Pro long Range Set - Questions
    By HairBrain in forum TBS Support
    Replies: 5
    Last Post: 27th April 2014, 11:42 PM
  4. Long endurance multirotor
    By radialmind in forum ROTORCRAFT
    Replies: 0
    Last Post: 14th September 2013, 11:21 PM
  5. Long Endurance Hexa
    By radialmind in forum PILOT'S LAB
    Replies: 0
    Last Post: 15th August 2013, 05:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •