Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: Introducing the Lumenier G10 DJI Replacement Arm

  1. #11
    Forum Member
    Join Date
    Mar 2011
    Quote Originally Posted by Lando View Post
    did you guys try sticking a battery into the Discovery? I installed the arms but my 4S 4000 and 3300 do not fit, the rear arm supports block the battery from being fully inserted into the quad. The Lypo's i use are the nano-tech's which are not that big but i guess if you fly 3S in your Disco then it should fit but who does that.......I'm fairly disappointed with this product so far, i did not mind cutting the support to fit over the battery wires but now i have to grind a bunch of metal so the batt can go all the way in and also one of the threaded holes was stripped on arrival......
    In our testing we used the same 3300 4s size lipo. We did not have CG issues by loosing a little bit of lipo cavity depth on the disco.

  2. #12
    Forum Member
    Join Date
    Jun 2013
    Click image for larger version. 

Name:	photo 1.jpg 
Views:	238 
Size:	206.5 KB 
ID:	50039Click image for larger version. 

Name:	photo 2.jpg 
Views:	250 
Size:	207.2 KB 
ID:	50040

    Mod to allow wider batteries like the TBS4500mah to fit properly... If the battery is taller you can also cut the g10 off in line with cut of the aluminum bracket. The down side is that you can only use 3 screws at the top which should be more then enough to secure the arm on.

    Hope this helps anyone with a similar issue

Similar Threads

  1. CineTank Mk.I - Official Thread
    By terabyte in forum FLYINGCINEMA
    Replies: 3627
    Last Post: 3rd October 2016, 12:24 AM
  2. Introducing FlyingFoams 48" Joker
    By atxheli in forum FIXED WING
    Replies: 2
    Last Post: 25th November 2013, 03:32 PM
  3. Introducing the OČ Multicopter
    By Greg in forum FIXED WING
    Replies: 8
    Last Post: 21st July 2011, 11:10 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts