Page 236 of 524 FirstFirst ... 136186226234235236237238246286336 ... LastLast
Results 2,351 to 2,360 of 5238

Thread: Lumenier QAV250 Mini FPV Quadcopter

  1. #2351
    Thanks Pozzix, Dust and bourney for your infos (and all other guys in this helpfull thread!) Just have finished the setup on the bench of the qav250 tonight, and HOPEFULLY the first test flight can be done tomorrow! Cant wait to try it with the naze32 acro!

  2. #2352
    Navigator
    Join Date
    Mar 2013
    Location
    Wilson NY
    Posts
    97
    Anyone tried Dragon Link with the QAV250? I seen a video on you tube but it must take some location management of video and the DL Receiver. I would consider this if a better VTx freq could be used (longer and better penetration).


    Thanks
    Kevin
    Last edited by kcobello; 1st May 2014 at 05:18 PM.

  3. #2353
    Navigator Andy_GetFPV's Avatar
    Join Date
    May 2013
    Location
    Florida
    Posts
    568
    We are happy to announce the QAV250 Mini FPV Quadcopter - Carbon Fiber Edition!
    Available for Pre-Order now!

    http://www.getfpv.com/qav250-mini-fp...r-edition.html

    The Lumenier QAV250 Mini FPV Quadcopter Carbon Fiber Editoin airframe has all the features of the standard QAV250 plus the added benefits of carbon fiber. The pure 3K carbon fiber material gives the airframe incredible strength while at the same time reducing the overall weight. The entire assembled kit weighs in at only 122g.

    Features

    • Full 3K Carbon Fiber airframe featuring a solid 3mm thick "Unibody" main plate.
    • Multiple motor mounting holes to fit a variety of motors.
    • "Bumpers" on the end of the arms to protect the motor during a crash
    • Flight controller cover plate includes cutouts for SMA connectors and adapters for the video transmitter.
    • A 3mm CNC-ed carbon fiber unibody main frame board
    • Integrated power distribution board for ESCs and FPV flight electronics
    • 2 integrated LED strips (white and red) to aid LOS orientation
    • Easy Lipo Access (suggested Lipo is a Lumenier 3s 1300mah)
    • Support for 32mm board cams as well as cams in cases with mounting bracket
    • Support for HD camera (such as the Mobius)
    • Integrated and included Landing Gear reminiscent of the QAV500 CF Landing Gear


    Weight

    • Airframe: 122g (with PDB, LED boards, landing gear and hardware)
    • AUW: The QAV250 carbon fiber edition is flown with an AUW of around 500g (includes all flight electronics, FPV gear and Mobius HD camera).



    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	carbon-edition.jpg 
Views:	1339 
Size:	116.6 KB 
ID:	45598   Click image for larger version. 

Name:	QAV250-Carbin-Fiber-Edition.jpg 
Views:	121 
Size:	134.9 KB 
ID:	45593   Click image for larger version. 

Name:	IMG_8513.jpg 
Views:	88 
Size:	91.3 KB 
ID:	45595   Click image for larger version. 

Name:	IMG_8514.jpg 
Views:	95 
Size:	92.7 KB 
ID:	45596   Click image for larger version. 

Name:	IMG_8521.jpg 
Views:	105 
Size:	104.9 KB 
ID:	45597  
    Last edited by Andy_GetFPV; 1st May 2014 at 06:42 PM.

  4. #2354
    Underground - Cloud Bound Dust's Avatar
    Join Date
    Mar 2012
    Location
    Visiting Earth
    Posts
    2,774
    Quote Originally Posted by kcobello View Post
    Anyone tried Dragon Link with the QAV250? I seen a video on you tube but it must take some location management of video and the DL Receiver. I would consider this if a better VTx freq could be used (longer and better penetration).


    Thanks
    Kevin
    I run Dragon link on my 250. Go with a mono pole. I couldnt ever get a safe reliable setup with the standar Dipoles that normally come with it. Like This one.

    Ive flown with the Rx in several locations, still have not found "the best" but so far, in the back where the battery usually goes has been the most promising. I wish DL would come out with their micro Rx already! /taps foot

    I chose DL so i couls use 2.4 for video. I LOOOVE 2.4 for video
    Live Slow - Fly FAST!

    FPV does NOT fly ASAP.

  5. #2355
    Underground - Cloud Bound Dust's Avatar
    Join Date
    Mar 2012
    Location
    Visiting Earth
    Posts
    2,774
    Quote Originally Posted by Andy_GetFPV View Post
    We are happy to announce the QAV250 Mini FPV Quadcopter - Carbon Fiber Edition!
    Available for Pre-Order now!

    http://www.getfpv.com/qav250-mini-fp...r-edition.html

    The Lumenier QAV250 Mini FPV Quadcopter Carbon Fiber Editoin airframe has all the features of the standard QAV250 plus the added benifits of carbon fiber. The pure 3K carbon fiber material gives the airframe incredible strength while at the same time reducing the overall weight. The entire assembled kit weighs in at only 122g.
    AAHHHHHHH!!!!
    Killin me smalls!!
    Live Slow - Fly FAST!

    FPV does NOT fly ASAP.

  6. #2356
    Quote Originally Posted by Andy_GetFPV View Post
    We are happy to announce the QAV250 Mini FPV Quadcopter - Carbon Fiber Edition!
    Available for Pre-Order now!

    http://www.getfpv.com/qav250-mini-fp...r-edition.html

    The Lumenier QAV250 Mini FPV Quadcopter Carbon Fiber Editoin airframe has all the features of the standard QAV250 plus the added benifits of carbon fiber. The pure 3K carbon fiber material gives the airframe incredible strength while at the same time reducing the overall weight. The entire assembled kit weighs in at only
    Wow finally I can put 1500mAh with the same auw of my G10@1300.

    Great job guys....

    Max

  7. #2357
    Navigator
    Join Date
    Dec 2013
    Posts
    27
    I have had a hard time trying to get a straight forward answer so I'm hoping that someone can help set the facts straight.

    Will this Lumenier 12a ESC;
    http://www.getfpv.com/lumenier-12-am...-firmware.html

    Work with this SunnySky x2204 motors without burning up?
    http://www.multirotorsuperstore.com/...ess-motor.html

    I read somewhere that those two units have a compatibility issue and that I would have to use different esc's?
    I also have the Afro USB Programmer, does anyone know if I can use it to flash the Lumenier firmware?
    Does anyone have this combo on their quad, does it work well?

    I would love to get flying but I'm really not interested in burning up my SunnySky motors or Lumenier ESC's.
    Last edited by M3Roc; 1st May 2014 at 07:25 PM.

  8. #2358
    Yep for sure..they work well together.

    Max

  9. #2359
    Navigator
    Join Date
    Dec 2013
    Posts
    27
    Quote Originally Posted by Pozzix View Post
    Yep for sure..they work well together.

    Max
    Do you know how to figure out what version of SimonK is on the Lumenier esc's?

  10. #2360
    Quote Originally Posted by M3Roc View Post
    Do you know how to figure out what version of SimonK is on the Lumenier esc's?
    No I don't know this...I'm sorry.

    Max

Similar Threads

  1. Replies: 3194
    Last Post: 30th August 2014, 04:15 PM
  2. Lumenier LiPo out of stock
    By tibertel in forum LUMENIER
    Replies: 17
    Last Post: 8th January 2014, 06:12 PM
  3. Replies: 13
    Last Post: 4th December 2013, 09:02 PM
  4. Replies: 18
    Last Post: 9th November 2013, 12:06 PM
  5. Mini Quadcopter with Gyro RTF Combo
    By skylark in forum ROTORCRAFT
    Replies: 1
    Last Post: 15th July 2012, 10:51 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •