Page 3 of 3 FirstFirst 123
Results 21 to 25 of 25

Thread: Fatshark DIY Mask

  1. #21
    Navigator Addy's Avatar
    Join Date
    Aug 2011
    Location
    lunteren
    Posts
    58
    Hi Markus,

    The part with the receiver on it also is control for brightness and contrast so if you take it out like i did you don't have control over that.
    I only used the kopin which needs 5v that you can get direct from a 5volt ubec.
    If you are only planning to use you're goggles with a groundstation i guess you can drop the receiver but when i fly "in the area" i am only using the SPW on my goggles and i don't need to bring a groundstation but that is up to you.
    I dropped that part because i am not using 2,4 which was my receiver and i wanted power from my RC Tx since i needed a cable from my Rc Tx because of the headtracker i also used power from my radio so i don't need another seperate battery.

    I don't have more fotoos from the build sorry for that but i guess you will figure that out.

    Addy

  2. #22
    I now have the mask and the right happy Lawmate RX sticks with velcro on the front

  3. #23
    Very nice

  4. #24
    Navigator JBeloncik's Avatar
    Join Date
    Sep 2011
    Location
    Northern VA
    Posts
    547
    Hi Addy,
    i am working on doing this exact mod to my old fatshark aviators. I can't see your images anymore...could anyone help me verify the cabling that goes to the kopin module? I was guessing the red, black and yellow were +5v, gnd, and video and the others were for brightness, etc. my multimeter disagrees! Any chance anyone has these pinouts? The kopin website doesn't help much either.

    Thanks!
    jason
    KK4HDH

  5. #25
    Navigator Addy's Avatar
    Join Date
    Aug 2011
    Location
    lunteren
    Posts
    58
    Hello Jason,

    Sorry for my late reaction, i'll have to see if i still have the image's.
    I will look into it this weekend

Similar Threads

  1. Best Headplay Ski-Mask Goggle Mod?
    By ross_badger in forum DIY
    Replies: 27
    Last Post: 7th December 2015, 08:17 AM
  2. I'm very impressed with HeadPlay mask
    By Steverino in forum FPV-Plastics
    Replies: 21
    Last Post: 1st October 2015, 11:32 AM
  3. Aio mask
    By FPV-PLASTICS in forum FPV-Plastics
    Replies: 10
    Last Post: 13th August 2013, 11:40 AM
  4. Fatshark Dominator Mask Mod
    By speedstep in forum DIY
    Replies: 8
    Last Post: 19th October 2012, 02:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •