Page 242 of 243 FirstFirst ... 142192232240241242243 LastLast
Results 2,411 to 2,420 of 2430

Thread: The QAV400 FPV Quad Frame by Lumenier (formerly fpvmanuals)

  1. #2411
    Forum Member
    Join Date
    Aug 2015
    Posts
    70
    hello all!, could anyone tell me or point me the way as to where I can get a build manual for the QAV400? that shows motor installation esc set-up etc. I can not seem to find the complete build manual. I found where to build the QAV400 frame and that's it. Thank you for any help. I am hoping for a link. have a great day!

  2. #2412
    Forum Member
    Join Date
    Nov 2011
    Location
    USA
    Posts
    6,044
    [QUOTE=jimmaplesong;128705]When you're outraged at chatch, please don't quote his bullshit.[/QUOTE]

  3. #2413
    Forum Member
    Join Date
    May 2013
    Location
    Florida
    Posts
    568
    A video of travels in India shot by Ashley Leung. Aerial shots done with the QAV400.


  4. #2414
    Forum Member
    Join Date
    Dec 2011
    Location
    Switzerland
    Posts
    332
    after a longer break due to my PhD I had little time to fly around. Luckily around our wedding day we made a short trip to Venice and I was able to fly in the morning.
    However this is a really short video but anyway I thought I share it with you guys.



    Andy

  5. #2415
    Forum Member
    Join Date
    Dec 2014
    Posts
    4
    My QAV400 with DX7S for sale. Pm me if interested

    DJI Naza M Lite

    Need gone

  6. #2416
    Forum Member
    Join Date
    Feb 2012
    Posts
    381
    Quote Originally Posted by TomWolves View Post
    hello all!, could anyone tell me or point me the way as to where I can get a build manual for the QAV400? that shows motor installation esc set-up etc. I can not seem to find the complete build manual. I found where to build the QAV400 frame and that's it. Thank you for any help. I am hoping for a link. have a great day!
    i got 4, and have posted a lot of info on setups with photos at http://www.rcgroups.com/forums/member.php?u=337366

  7. #2417
    Forum Member
    Join Date
    Oct 2013
    Posts
    41
    Can anyone tell me what size screws are used to attached the prop adapter to the Lumenier FX2216-9 1100KV motor? There are 3 small metric hex screws that are used on each motor. My best guess is M1.6 x 3mm.
    Last edited by dsheikh573; 11th December 2015 at 12:21 PM. Reason: Correction : M1.6 instead of 1.6M

  8. #2418
    Forum Member
    Join Date
    Aug 2012
    Location
    Cambridge ,New Zealand
    Posts
    305
    QUOTE:My best guess is 1.6M x 3mm. :UNQUOTE

    I hope they are not 1.6M meaning meters X 3mm HE HE

    If they are the same as tiger motors then they are 2mm x 8 mm long

    The hole in the prop adaptor is 2.1mm according to

    http://www.getfpv.com/catalog/produc...98/image/1735/

    and 8mm seems about right for length
    Last edited by STI-REX; 11th December 2015 at 04:18 AM.
    [B]4 wheels moving body 2 wheels moving soul
    [/B]

  9. #2419
    Forum Member
    Join Date
    Oct 2013
    Posts
    41
    Sorry, I mistyped. I meant to say "M1.6 x 3".
    I saw the drawing that shows a size of M2. I bought that size screw and they are definitely too large. The size I think is M1.6, but it could be M1.4. The length is much shorter than 8 mm. They are either 3mm or 4mm. I measured 3mm using the broken screws but it was approximate.
    I can find places online to buy these. But what places sell them at brick and mortar stores? HD, Lowes, etc, do not carry precision screws. Eye glass shop?

  10. #2420
    Forum Member
    Join Date
    Aug 2012
    Location
    Cambridge ,New Zealand
    Posts
    305
    According to the T-Motor website the standard screws for the prop adaptor are m2 by 8mm

    And I am pretty sure the Getfpv motors are supplied by Tiger Motors

    You could try a HOBBY shop that sells r/c helicopters for the bolts just take the motor with you and do a trial fitting OR a specialist engineering supply / bolt shop

    Any hobby shop worth visiting should have blister packs of bolts / nuts in metric sizes but you may have to cut them to length make sure you do this accurately so as not to unbalance the motor

    Hardware / automotive stores nearly NEVER carry anything smaller than 4mm

    Last edited by STI-REX; 11th December 2015 at 06:12 PM.
    [B]4 wheels moving body 2 wheels moving soul
    [/B]

Similar Threads

  1. Replies: 369
    Last Post: 23rd April 2013, 05:34 PM
  2. Traveller's FPVManuals PD Tri Cronicals
    By Traveller in forum PILOT'S LAB
    Replies: 3
    Last Post: 5th July 2012, 07:15 AM
  3. Copying FPVmanuals propeller.
    By dr_serious in forum RC TECH
    Replies: 0
    Last Post: 19th December 2011, 10:01 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •