Search:

Paperquad2015,
Lumenier is our brand at GetFPV.com. We are located in Sarasota, Florida.

We are currently out of the stock of the 2206 2350kv version but they are in transit to us now. Here is...

Hello Curthbert,

This is a good question.

We do not recommend doing this because the two different escs will have different firmware and will perform differently. The end result would be a not...

Hello Flech3k,
That's a good question. The spacer will need to go on the bottom of the arm. The same is for the QAV400 and QAV500 with the G10 arms. And yes you are to use the long screws and nylon...

Hello Doobie,
We can no longer ship batteries to Canada do to IATA regulations which started April 1st. We are working with our dealers all over the world to carry our batteries so that they can...

Hello hndaluvr,

Yes, all three frames use the same top plate.

Hello Doobie,

Here is one of our dealers that will be happy to help you:
Richard
Tabagie du Boulevard
3760 Boulevard des Forges
Trois-Rivieres, Quebec, g8y4r2
Canada
T: 8193723867

Hello Zoide,
Yes, we have quite a few in stock and do offer next day shipping. If you get the order in before 12:00 pm(EST), we will get it shipped out the same day.

HFMan,
We at GetFPV are selling the only model that Fatshark has to offer. The transmitter covers the following channels:


Ch1: 1080 MHZ
Ch2: 1120 MHZ
Ch3: 1160 MHZ
Ch4: 1200 MHZ
Ch5:...

Here's the link:
http://www.getfpv.com/fatshark-1-3gh...ansmitter.html

The correct price $36 for the transmitters has been updated as per Greg until the end of the year:
http://www.getfpv.com/fatshark-1-3ghz-250mw-a-v-transmitter.html

Cascadepp,
I would recommend the following setup for a QAV180:
Flight Controller- http://www.getfpv.com/flight-controllers/acro-naze32-flight-controller-rev6-w-pin-headers.html
Motors-...

Here you go Eusor: http://www.getfpv.com/replacement-5-8ghz-bluebeam-ultra-antenna-cover.html

When I received mine I saw the OSD was showing the same problem as the original module but I noticed the other colors are sharper. But after adding a LC Common filter...

If you contact us at GetFPV we will be happy to provide you with the tracking number on your order. http://www.getfpv.com/contacts or 941-444-0021

Please give details on your setup on the SkyFighter.

One other difference in the lenses is the "Megapixal" lens has a IR filter on the lens. This is actually needed for the CS-800.

I am using this one: http://www.getfpv.com/fpv/1258-1280mhz-mini-200mw-transmitter-us-1748.html

I tested the module with my Dom V1 and receive the same issue with the edges of the trees and any script has a bright shimmer and is unreadable. I am using a Lumenier CS-600 camera.

+1!

Any info or update on when the Manta will be released. How's the testing going?

Hello Crchisholm,
Yes, the eye cups will work on all the fatshark goggles.

ETA on the Manta?

I voted!!

What I recommend when you don't have enough weight in the front is to move the battery to the top of the frame and strap it down. If you have your DJI GPS in the middle just relocate it and make the...

If you were wondering if the goggles will be compatible with an ImmersionRc transmitter, watch this video.
https://www.youtube.com/watch?v=_JSBqfPEiyw