Search:

You Most probably have sorted this by now but just in case

https://www.getfpv.com/commercial-industrial-multicopters/lumenier/qav500-fpv-quad/long-delrin-landing-gear-for-g10-arms-set-of-4.html

If you wanna play you gotta pay............pretty simple really mow lawns ,shovel snow, flip burgers ,whatever if you really want it you will find ways to make it happen

No I am after a set of 4 motors for a new build of a Discovery (non pro )

I sincerely hope they are improved over their older series of batteries

I used to race 1/8th scale monster trucks and buggies and I bought 4 sets (8 X 2s 5000mah , 2 xrun in series to make 4s )...

Any news on stock replenishment of 2217 900kv Growler motors ?

Cheers
James

the 450 and 550 flame wheel arms are the same arms no length difference
The 330 has shorter arms

Video doesn't work via that link above for me

Video still shows as private for me

Video link comes up as private video on youtube

besides the weight difference is there a set you would prefer to use if you were to buy again

Also are the carbon versions milled out on the underside of the motor mounting section or is the...

You may need to disable the the windows function that only allows signed driver to be installed

I have windows 10 as an upgrade from win 8.1 and I disabled this and have no problems running any of...

Is the bottom of the PDB insulated from the carbon frame ?

If the PDB has electrical connection with the carbon frame then that is most probably your short

Remember carbon fiber is conductive

Thanks for posting your findings as to why it would not arm

Not too many people ready to confess to getting something not quite right in the setup, most blame the equipment

Are all of the wires on the esc's still attached to the plug that goes into the Naza as in + - and signal and are they plugged in the right way around as in - to -, + to + ,signal to signal

I...

I would bet money on the "Guy who lost his one with the Gopro attached" had the wifi on the go pro turned on and was using a phone/tablet to watch the video stream

Wi-fi MUST be turned off on the...

I have given them the benefit of the doubt and made 3 orders in the past year and EVERY item I bought has not fitted what it was supposed to be fitted to or has been faulty
Not worth dealing with...

That looks really good I still rate the tarot as a cost effective gimbal to experiment with

Take a look in this link for the GCS download

https://www.openpilot.org/download/

As the title states who still has and regularly flies a Standard non Gimbal discovery

I have a quad here that I am considering harvesting the parts from to build another Discovery just for fpv as...

That little Align quad looks pretty dam good and is being flown by one of the top 3D heli pilots in the world

Why do you think it doesn't fly well ?

According to the T-Motor website the standard screws for the prop adaptor are m2 by 8mm

And I am pretty sure the Getfpv motors are supplied by Tiger Motors

You could try a HOBBY shop that sells...

QUOTE:My best guess is 1.6M x 3mm. :UNQUOTE

I hope they are not 1.6M meaning meters X 3mm HE HE

If they are the same as tiger motors then they are 2mm x 8 mm long

The hole in the prop...

Which was answered in post #4 back on the 5th of January

QUOTE from post #4

"The CC3D supports a GPS sort of, but only for OSD displaying long/lat. you can't use it for alt hold, autonomous...

So 1 went to Botany Australia being still in transit and 1 went to Botany Auckland NZ final destination but still in transit according to the tracking on the same day

I have only seen that kind of thing on a tarot T2D gimbal before and I traced it back to a dodgy pitch motor

Maybe go through all the connectors and check they are all making good contact of the...