What's up with the newer FatShark 1800mAh batteries? They don't have a balance plug, it's just a +/- cable to power the fan in the goggles now. Do the newer ones have an internal balancing circuit or...
Type: Posts; User: vzachari; Keyword(s):
What's up with the newer FatShark 1800mAh batteries? They don't have a balance plug, it's just a +/- cable to power the fan in the goggles now. Do the newer ones have an internal balancing circuit or...
You can use a circuit board cleaner spray. WD40 has one such product and there are others too in the market.
Thank you for letting us know. For me personally this is great news! Every time I would put on my DomHD goggles the first thing in my mind was "does PeteDee get blurry edges?". It's all good now,...
That's a pretty nice feature in this cold weather.
Looks like I can charge the Fatshark 1800mAh LiPo at 1C (1.8 amps) over 81 minutes and it looks like it's reaching full (sort of).
You can see the charge current level and cell voltages through...
There is only one jumper on the camera and it says PAL NTSC on it's left side. You should seriously update the vortex to the latest firmware though.
How is the LED board coming along? Can we have the dimensions and/or more pictures?
You have an antenna on the VTX right?
Hello,
Do you have any of the new DYS XM30 ESCs on order or coming soon?
Also the DYS XM30A ESCs if possible because they appear to perform really well and can handle motors such as the RS2205 that require currents above 20A:
...
I bet there is but the cleanflight manual is also a very good resource for these kind of things
Do you have an RSSI channel assigned on PPM in Cleanflight (on the RX tab)? If so remove it and it will go away. Do you have more than 8 channels assigned on PPM?
First thing you need to do is go into cleanflight at the Rx tab and make sure the min middle and max values are 1000 1500 2000 for all your channels (you may need to adjust the subtrims on your TX)....
I have seen this before with a 9XR and another UHF system interfering with the 5.8Ghz feed (Which is weird). For that one the interference was coming from the 9XR powering the the UHF system and it...
Then just solder the FrSky sensor Vin cables on the Bat +- pads of the vortex PDB. The FBVS01 is about 1g, $2-3 and as big as a servo plug more or less. I think it would be much cleaner than...
Is your 5.8Ghz receiver in your goggles or on a stand connected to your goggles via cable?
I use this FrSky voltage sensor:
http://www.hobbyking.com/hobbyking/store/__16671__FrSky_Battery_Voltage_Sensor_FrSky_Telemetry_System_.html?gclid=COjzyfa2w8oCFYcBaQodo90EbA
One side plugs to...
Greetings,
Are you guys thinking of offering the EMAX RS 2205 motors for sale?
Thank you
I have a first batch CC3D! It's now going to become a highly valuable collectors item in a decade or two.
Still 100g less than the pro :) that's a lot
For reference, my 285 with a 4S 1500mAh battery, a runcamHD and the same antenna as the PRO (without the 5g plastic cover):
http://s25.postimg.org/55w5cblsv/IMG_20160101_142355.jpg
It's like...
The battery is 167g...so 564g without any battery on. Unless your battery weighs much less than 167g then the Vortex is heavier
https://scontent-iad3-1.xx.fbcdn.net/hphotos-xpt1/v/t1.0-9/11037246_10205389689803681_611077456075245365_n.jpg?oh=84fabc1e586c6e32c82fa6307e765253&oe=5700F145
Still yours is lighter than the vortex pro
Ecalc multirotor is also your friend :)
http://www.ecalc.ch/xcoptercalc.php?ecalc&lang=en