image

Search:

Type: Posts; User: hdphilip; Keyword(s):

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Akfreak, Here's where I'm at with my sparky. ...

    Akfreak,

    Here's where I'm at with my sparky.
    I haven't been able to see a smooth baro reading in CF, although in Taulabs it fine.
    (Taulabs < .4 meters)
    Telemetry for my taranis been an...
  2. excellent example of the open logger....the other...

    excellent example of the open logger....the other day i was assisting a guy in trying to find out what went wrong


    here's some links:


    https://www.sparkfun.com/products/9530
  3. heli, do you have any plans to support the "open...

    heli,
    do you have any plans to support the "open logger" platform ?
  4. Replies
    2
    Views
    2,049

    The spacers are about 1/4 inch plastic, the...

    The spacers are about 1/4 inch plastic, the weight savings benefits from not having to have separate bec, voltage current sensors
    with the interconnecting wires and hardware
  5. can you reverse stick inputs?

    can you reverse stick inputs?
  6. Theirs a programmable led that shines through the...

    Theirs a programmable led that shines through the cutout on the bottom plate.
  7. just the WS2812 are programmable. in cleanflight,...

    just the WS2812 are programmable. in cleanflight, I put the PDB in http://fpvlab.com/forums/forumdisplay.php?61-Power-Regulation-Power-Distribution
  8. Replies
    2
    Views
    2,049

    Another 250 PDB

    Here's an Another PDB board i made for my 250 quad, i think it's a ZMR250, it's from Banggood.

    The reason for making it was i wanted to clean up the wiring and add some fun features.
    current...
  9. hey guys, here's a new power distribution board...

    hey guys,
    here's a new power distribution board I made for my 250 quad,
    it has a 5 volt BEC, voltage sense, current sense, connections for
    video transmitter, camera, programmable led's.

    ...
  10. I'm using pid controller "0" old multiwii, I...

    I'm using pid controller "0" old multiwii, I printed out the stick commands and going to give it a try.


    I ran the Autotune, which worked, my 250 quad increased in altitude, but controllable.

    ...
  11. here's a question about tuning, what's the best...

    here's a question about tuning, what's the best adjustment to do if your quad drifts backwards? I've leveled it with the calibration, any ideas?
  12. can you try a different computer?

    can you try a different computer?
  13. I've autotuned in the 20150213 firmware, and...

    I've autotuned in the 20150213 firmware, and ignored the warning too, works fine, i supposed making sure you can arm it is the true test. before auto tuning, make sure your quad is trimmed out...
  14. it's also a good idea to have a 50 ohm...

    it's also a good idea to have a 50 ohm termination to put on the antenna port, your vswr would be 0 in the perfect world, it's a good idea test your setup before checking your antenna.
  15. Greg, I had a similar problems with mine, after...

    Greg, I had a similar problems with mine, after flashing the 2015 software, i wasn't able to go back and flash 2014 software, it is almost like I bricked it, but, what i found was (if i recall...
  16. I'll email you the settings later today

    I'll email you the settings later today
  17. can you try to run the GCS from another computer?...

    can you try to run the GCS from another computer?
    I had some weird issues with the GCS, switched to my ol' xp laptop and all is well, just a thought
  18. I was flying my brain today, pretty much the...

    I was flying my brain today, pretty much the "maiden" flight, using the OSD, altitude hold, GPS going, this is on my ADS 400 quad, and it was flying nice, smooth, at about 50 feet, I was getting a...
  19. is it possible to return to home on a failsafe...

    is it possible to return to home on a failsafe condition ?
  20. flew my new brain FC today, took a few...

    flew my new brain FC today, took a few adjustments on the pid's to get it smooth, then ran the Autotune, which at first will make you a bit nervous :eek:, it didn't take much to keep it under control...
  21. Thanks, It appears to be working, I believe it...

    Thanks,
    It appears to be working, I believe it was important to plug the board in while the green bar graph was descending.
  22. well I think my brain had it for tonight, when i...

    well I think my brain had it for tonight, when i plug the usb cable into it, the blue led comes on steady, for about 5 seconds, the goes off, and i get the usb disconnect sound. it like all of the...
  23. I tried that, didn't help. attached is another...

    I tried that, didn't help. attached is another screenshot.


    Anyways this is an issue with Taulabs on my computer and really doesn't concern the brain flight controller.


    I did hook my brain...
  24. In the attitude module of Taulabs, theirs a...

    In the attitude module of Taulabs, theirs a temperature compensation tab, how important is this to set up?
  25. i think most of the problems are on my computer,...

    i think most of the problems are on my computer, I can run Taulabs on other computers and it works fine, I have best results when i created another user on this machine to run Taulabs, maybe the...
Results 1 to 25 of 39
Page 1 of 2 1 2