image

Search:

Type: Posts; User: shikra; Keyword(s):

Page 1 of 20 1 2 3 4

Search: Search took 0.11 seconds.

  1. Hi - had a guess at which is you and re-sent....

    Hi - had a guess at which is you and re-sent. They should be issued automatically.If not received check spam folders.
  2. Possibly. It depends what commands they implement...

    Possibly. It depends what commands they implement in MSP.
  3. All 6 VTOL modes above added. It is available...

    All 6 VTOL modes above added.

    It is available as test release 1.9.1.4
    Will need to tick "show test release" in gui when flashing


    FAQ updated:

    5 Is there support for VTOL
    * VTOL is...
  4. Hi, sorry for delay - been away for a few weeks...

    Hi, sorry for delay - been away for a few weeks so sorry for late answer.

    Have not been asked for VTOL before! - the only real OSD difference between multirotor and fixedwing (and VTOL) is the...
  5. Hi, check FAQ #1 -...

    Hi, check FAQ #1 - https://github.com/ShikOfTheRa/scarab-osd/wiki/FAQ

    1 Unable to flash and I get "Programming FAILED: sending 3020"


    99% of time this is connectivity or power issue
    Check...
  6. Do you have arming on a switch ? IF so - is it...

    Do you have arming on a switch ? IF so - is it the same channel as in the layout tab? Maybe it is changing to a blank screen layout.
  7. Great - thanks for the update. I added to the...

    Great - thanks for the update.

    I added to the install notes a few months ago, but it is very easy to miss:
    https://github.com/ShikOfTheRa/scarab-osd/wiki/MAVLINK-installation
  8. Short answer: In GUI, enter 2600 as the upper...

    Short answer:
    In GUI, enter 2600 as the upper calibration value. It will highlight in red as a warning it is outside of expected values. Let me know if this works.
    Long answer:
    in mavlink...
  9. https://github.com/ShikOfTheRa/scarab-osd/wiki/Tro...

    https://github.com/ShikOfTheRa/scarab-osd/wiki/Troubleshooting-Connectivity
  10. Some interesting statistics. Often wondered how...

    Some interesting statistics. Often wondered how many FPV users there are in the world.

    Well there are now over 50k MWOSD users at least :)

    78980
  11. Hi yes PX4 sends PWM values for channels 0 – 15...

    Hi yes PX4 sends PWM values for channels 0 – 15 via serial. It uses mavlink protocol.
    S
    ome install notes:
    https://github.com/ShikOfTheRa/scarab-osd/wiki/MAVLINK-installation


    NOTE: RSSI...
  12. Video voltage Adjust should be set to approx....

    Video voltage
    Adjust should be set to approx. 200 can be fine tuned to show correct voltage. Usually no more than +/-15 to get it accurate. It is multiplier and will impact displayed voltage...
  13. @oyvinla: I struggled to get engagement with...

    @oyvinla:
    I struggled to get engagement with Raceflight / FlightOne guys. Bugs with them raised but no response. So support for it was as good as could make it without.
    The GUI dev used FlightOne,...
  14. @wcfung: For “Any voltages greater than 5v...

    @wcfung:

    For “Any voltages greater than 5v should only be connected to BAT1 and BAT2 pins”
    Normally this is true…. except for VCAM.

    VCAM is linked between video in and video out....
  15. @ wcfung: As Marv said, I suspect your RC screen...

    @ wcfung:
    As Marv said, I suspect your RC screen switch option are not matching what you want.
    Also note, you must “connect” first so GUI can read current settings.

    If you only want one screen...
  16. Hi Marv, good news - I confirmed the issue...

    Hi Marv, good news - I confirmed the issue accessing menu for PX4

    I built PX4 tricoper last night to test and it would appear that some (or all versions) of mavlink send a zero value for throttle...
  17. Cheers Marv It was added to bring support in...

    Cheers Marv

    It was added to bring support in for ardupilot / PX4 and GPS OSD users. Before that it would only have worked for users who had the a specific channel setup.

    We can definitely...
  18. I didn't know either. I have added it into the...

    I didn't know either. I have added it into the reference section of the Wiki for future:

    https://github.com/ShikOfTheRa/scarab-osd/wiki
  19. I haven't used it myself, but I hear passthrough...

    I haven't used it myself, but I hear passthrough is a bit hit/miss for all apps.
    I know that doesn't help!
  20. Ok marv - I'll get this checked out. One think...

    Ok marv - I'll get this checked out. One think with mavlink is that channels support is not consitent like it is with inav etc. so usually have to change some settings. The two impacting that are as...
  21. Hopefully you are sorted now. The mails are sent...

    Hopefully you are sorted now. The mails are sent automatically but unfortunately they are sometimes picked up as spam and blocked or put into a spam forlder. Its a real pain...
  22. Ye s- you need to install MWOSD fonts. There is a...

    Ye s- you need to install MWOSD fonts. There is a button in the GUI for this.
  23. Thanks. Glad you are sorted. Haven't used matlab...

    Thanks. Glad you are sorted. Haven't used matlab so far but will give you a shout if I install it.
  24. I use a mix of the following: 1 prime editor -...

    I use a mix of the following:

    1 prime editor - MWOSD built in font editor

    2 I used to use the max7456 char wizard here:...
  25. Supports both options

    Supports both options
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4