image

Search:

Type: Posts; User: zlutyslamak; Keyword(s):

Page 1 of 4 1 2 3 4

Search: Search took 0.36 seconds.

  1. Hi guys, why do you think, it is impossible...

    Hi guys,

    why do you think, it is impossible with micro Crossfire ? Its fully working with micro, nano or nano diversity. Just define on which pin you want to have anything from CRSF. s.bus till...
  2. Hi, TBS transmitter has no internal battery....

    Hi,

    TBS transmitter has no internal battery. You have to connect it to battery. In manual you will find what voltage is allowed. I do use in my relay station 2P2S Li-Ion pack because same power is...
  3. Hi, mostly is the problem in not right output...

    Hi,
    mostly is the problem in not right output signal. First look at XF transmitter if you have right input (at display should be something like "12ch PPM"). Then you have to setup one of receiver...
  4. Hi, your landing strip is in one direction over...

    Hi,
    your landing strip is in one direction over 400 meters long - if you will be in tree level and you fly from trees to the road you have no problem. All depends from wind direction, but even with...
  5. Hi, depends on landing place. We do have about...

    Hi,

    depends on landing place. We do have about 100 x 40 meters meadow as landing zone, that is from 2 sides "fenced" by ca. 5 meter tall trees. Two sides are open to long field. As we do fly...
  6. Hi Roald, current CG position I do have...

    Hi Roald,

    current CG position I do have on Fascination is 86 mm from leading edge - in comparison to factory drawing its 1 mm behind last recommended CG postition from manufacturer. In past I...
  7. Hi Roald, I will be at our workshop at...

    Hi Roald,

    I will be at our workshop at Sunday - will mount Facination together and make mesurement.

    Jan
  8. Good to know that even bad experience can help...

    Good to know that even bad experience can help someone :-)

    Jan
  9. OK now I am on... if you fly with Xplorer on...

    OK now I am on... if you fly with Xplorer on winch then you know how changes the right CG position with weight and you need no advices anymore :-D

    I have meant the hard foam that is supplied with...
  10. Hi Mike, Diamond D60 is a bit longer as HS65,...

    Hi Mike,

    Diamond D60 is a bit longer as HS65, but the 3mm should be not critical. By DS6100 is most important saving of the weight in tail - difference to HS82MG is about 10g. If you calculate...
  11. Replies
    4
    Views
    895

    Thanks Mike, Good luck with build and if you...

    Thanks Mike,

    Good luck with build and if you will need any further help, just let me know ;-)

    Jan
  12. Hi Mike, as agreed below pictures of...

    Hi Mike,

    as agreed below pictures of instalation of servos in tail. Both servos are placed on 2mm ply that is fastened to fuselage with 4 M3 sinkhead screws. The fuselage is reinforced by 2 mm...
  13. Hi guys, be carefull with weight behind CG....

    Hi guys,

    be carefull with weight behind CG. With added weight you will have to move the CG bit in front because you need to get higher angle of attack for more lift on bigger angle of attack....
  14. Hi Mike, I have in tail both servos - H85MG...

    Hi Mike,

    I have in tail both servos - H85MG for elevator and H65 metal carbonite for rudder. Instalation a bit tricky but doable. Will make some pictures.

    Regarding antenna placement -...
  15. Hi Mike, had uploaded the images again. V1...

    Hi Mike,

    had uploaded the images again. V1 or V2 is general no big difference, except aditional protection if powered through USB (V1 has free route on 5V rail to for example Vector). Size is...
  16. Hi, we had similar problems due to...

    Hi,

    we had similar problems due to interference with 1,2GHz video transmitter... just tip for check.

    Jan
  17. Hi Mike, sorry to be late, my computer came on...

    Hi Mike,

    sorry to be late, my computer came on strike :-)

    The camera mount is just a drop shape in two parts with square hole inside. Parts are secured to each other simply by electrical tape -...
  18. Hi LVSloper, pan for camera in canopy of...

    Hi LVSloper,

    pan for camera in canopy of Fascination is piece of cake. I have HD Runcam Split V2 there with pan - the only problem with Split is that is able to work with 64GB card maximum, means...
  19. Discovery

    Hi IMEIV,

    we do build Discovery right now for my friend. I have to say as I was excited from the design, I am not so happy anymore. We had found some design and manufacturing flaws, that had us...
  20. Hi Rfriedman, I think that best for search of...

    Hi Rfriedman,

    I think that best for search of new airframe is simple analysis of what you like and dislike on current setup. The biggest disadvantage of Cularis as I know it from one thermal...
  21. Replies
    323
    Views
    79,193

    Hello guys, I wrote short article about relay...

    Hello guys,

    I wrote short article about relay for Crossfire, that I do use with 1,2GHz video system:
    ...
  22. TBS crossfire relay station (with 1,2GHz video)

    Hello guys,

    As I use the Crossfire about 3 years, could be helpful for CX users my setup and experience.
    I do use the Crossfire in combination with 1,2GHz video. Due to nearness of...
  23. Replies
    2,413
    Views
    498,747

    Sticky: Hello, what antennas did you use ? Jan

    Hello, what antennas did you use ?

    Jan
  24. Hi Parajared, lift from almost ground...

    Hi Parajared,

    lift from almost ground height:


    https://youtu.be/Rhr3WDsEsT0

    Jan
  25. Hi guys, wrote down short story of...

    Hi guys,

    wrote down short story of Fascination for long therm thermal soaring if you are interested in:

    https://fpvlab.com/forums/showthread.php?53191-FPV-for-7-hours-thermal-soaring

    Jan
Results 1 to 25 of 76
Page 1 of 4 1 2 3 4