PDA

View Full Version : ULTIM 130 Piko edition (3mm carbon) 3 inch props



Stef France
25th September 2016, 05:28 PM
Hi guys,

I would like to present you my new frame design. It can be found and purschase on arrmatan production http://armattanproductions.com/pages/kit_detail/444 (http://redirect.viglink.com/?format=go&jsonp=vglnk_147529930869013&key=8a24c98a696b4e5723db293f62190b87&libId=itqr0txk010004o4000DAeet21na0&loc=http%3A%2F%2Fwww.rcgroups.com%2Fforums%2Fshowt hread.php%3Ft%3D2726385%26highlight%3Dultim%2B130&v=1&out=http%3A%2F%2Farmattanproductions.com%2Fpages%2 Fkit_detail%2F444&ref=http%3A%2F%2Fwww.rcgroups.com%2Fforums%2Fshowt hread.php%3Ft%3D2726385%26highlight%3Dultim%2B130% 26page%3D2&title=ULTIM%20130%20Piko%20edition%20(3mm%20carbon )%203%20inch%20props%20-%20RC%20Groups&txt=http%3A%2F%2Farmattanproductions.com%2Fpages%2 Fkit_detail%2F444)


the X version
http://armattanproductions.com/pages/kit_detail/446
(http://armattanproductions.com/pages/kit_detail/446)


My goal is a 130mm 3'' props on 4S, able to carry a full size cam and designed for the FuriousFPV Piko BLX flight controller. I will use the runcam Swift, may be with the furiousFPV VTX/OSD combo.
ESC are Little bee pro 20A, motor are DYS SE1407 Race Edition 3600KV and battery 4S 850mAh.
All parts are on the road...

As you can see i made two version for the bottom plate.
The design intend to install the battery under the bottom plate.

Stef France
1st October 2016, 12:51 AM
Received some parts, unfortunately, my runcam swift is defective out of the box (flickering as soon as light increase).

Stef France
1st October 2016, 01:18 AM
Hi,

Find hereunder some photos of my frame. It's the standard version.
Total weight with hardware is 39.3g. Found the frame very stiff, not worried about the frame strenght. No holes where they should not be.
With the runcam swift, no props or frame in the fiel of view.
Will begin the assembly soon.

Stef France
1st October 2016, 02:22 AM
ESC installation

Stef France
1st October 2016, 04:58 AM
Finished the video installation with FT200 VTx, waiting for the Tramp HV.


https://www.youtube.com/watch?v=Bxcr8aWg9RE

Stef France
4th October 2016, 03:57 PM
Onboard 4S punchout and 3S FPV with runcam2 and 3030x3 props.

https://www.youtube.com/watch?v=MfiRnCzzVpk&feature=youtu.be

Stef France
4th October 2016, 04:11 PM
Battery pad installation. My swift board cam replacement is on the road, 4S onboard video soon! Weight without battery is 182g with current components.

Stef France
4th October 2016, 04:20 PM
3S flight at the abbeye.
https://www.youtube.com/watch?v=3OH1yUg4Hpc&feature=youtu.be