View Full Version : Head Tracking Help Please?

12th March 2012, 02:25 AM
I'm using a DX8 Tx with EzUHF Tx and Dominator HT Module. All other flight controls work great, However I'm having no luck with the HT. On the ImmersonRC Tool program I have updated the firmware and on the configuration tab I have Enable Using [None, Use UHF Tx Pushbutton] selected
Pan Source ans Destination [CH7]
Tilt source and Destination [CH8]
which the pan/tilt servos are connected to CH 7 & 8.
Remote Power Switch [Use only the EzUHF toggle switch]

This is the configuration that I used to make the EzUHF to Head Tracker cable.


When I push the UHF Tx Pushbutton it allows me to control the pan/tilt with the DX8 know and Aux2 switch. When I push it again the pant/tilt re-centers. Another words the HT on the goggles does nothing.

Once again any and all help is greatly appreciated and I thank all of you greatly.

Thanks Again,

12th March 2012, 02:38 AM
I don't know if it has any relevance but I am using the eagletree osd pro and elogger v4 along with the EzUhf 8CH Rx