Aimdroix Evo One OCTO configuration Lift to weight Ratio

[Liam]

The lift to weight ratio on the EVO ONE is tricky when doing an OCTO config. KV 650's with 14" x 4.7 blades with APM 2.6, 30 amp esc's barely got it off the ground. Anyone got a better solution?

[Flateric]

Do you mean x8 configuration?

what is your all up weight and 4s....6s?

also specific motors you are using.

[Djinnphiz]

The lift to weight ratio on the EVO ONE is tricky when doing an OCTO config. KV 650's with 14" x 4.7 blades with APM 2.6, 30 amp esc's barely got it off the ground. Anyone got a better solution?

Similar config...
– 8X Octo
– (2) x Emax 4-in-1 25 Amp ESC
– (8) x Emax 650 KVA motors
– 11 x 4.7 Tiger props
– Wookong M2
– Intended trial Lipo – 8000 x 4S x 10c and 10,000 x 4S x 10C

Hope to trial it within next 2 weeks.
Suspect might have to use lower KVA motors – perhaps 400 / 30 Amp ESC / 14" props.

This baby WEIGHS quite considerably... Then again, I could be pleasantly surprised. Will advise :)