PDA

View Full Version : Aimdroix Evo One OCTO configuration Lift to weight Ratio



Liam
12th July 2015, 08:30 AM
The lift to weight ratio on the EVO ONE is tricky when doing an OCTO config. KV 650's with 14" x 4.7 blades with APM 2.6, 30 amp esc's barely got it off the ground. Anyone got a better solution?

Flateric
13th July 2015, 12:29 AM
Do you mean x8 configuration?

what is your all up weight and 4s....6s?

also specific motors you are using.

Djinnphiz
28th August 2015, 11:06 PM
The lift to weight ratio on the EVO ONE is tricky when doing an OCTO config. KV 650's with 14" x 4.7 blades with APM 2.6, 30 amp esc's barely got it off the ground. Anyone got a better solution?

Similar config...
8X Octo
(2) x Emax 4-in-1 25 Amp ESC
(8) x Emax 650 KVA motors
11 x 4.7 Tiger props
Wookong M2
Intended trial Lipo 8000 x 4S x 10c and 10,000 x 4S x 10C

Hope to trial it within next 2 weeks.
Suspect might have to use lower KVA motors perhaps 400 / 30 Amp ESC / 14" props.

This baby WEIGHS quite considerably... Then again, I could be pleasantly surprised. Will advise :)