PDA

View Full Version : IRC Du2400 RX to IRC 25mW 5.8GHz Relay setup problem.



rentboynz
11th February 2012, 11:56 PM
Dear Sander and Immersion-RC Team

I am using an IRC 25mW 5.8GHz transmitter to relay the signal from my Duo2400 receiver based ground-station to my 5.8Ghz Fatshark Goggles. This works very well except the video in my goggles always appears very dark, sometimes flashing b/w.

I have tried everything I can think of including powering the individual components with separate battery's, adding/removing grounds and filters and have also tried 2 different 5.8GHz TXs. The brightness level appears correct if I connect the goggle directly to the duo2400 with a cable.

Can you suggest a fix for my problem? Will the buffered adjustable video output of the IRC power box help?

Kind Regards
Chris

rentboynz
15th February 2012, 02:43 AM
I have managed to fixed my colour issue and flew today with good video and no annoying cable so I'm happy. the fix was simple, initially I had set the relay RX to channel 5 (the same as my Tricopters) but switching it to channel 1 fixed all the problems.