PDA

View Full Version : Gimbal upgrade mount



Goshawk
11th February 2014, 01:51 PM
The new mount interferes with my naza m/c. It's the Allen bolt that's touching it.
Any ideas please?

Blue Sweeper
11th February 2014, 04:35 PM
Just remove the two bolts and spacer, as not really needed, there's a thread somewhere on here that says the same. I removed mine and not had any problems.

Goshawk
11th February 2014, 06:07 PM
Just remove the two bolts and spacer, as not really needed, there's a thread somewhere on here that says the same. I removed mine and not had any problems.so really not fit for purpose then. Why don't the make it narrower at that end? I've done it 2nite by cutting one frame bolt down in length as the have smaller/thinner heads. And I get about 1mm clearance between bracket and naza. Thanks for the advice tho;)

deanot
11th February 2014, 06:43 PM
Think the instructions tell you to move the Naza a slight amount to allow for clearance.