PDA

View Full Version : Spanky Mini Quad



soto48
30th July 2013, 10:58 AM
Hi Chatch, I am about to order the 400Q and I see you have Spanky frame, that's look very cool, I like the arm design, can you share the spec for motor, prop size, etc and how about the flying characteristic compare to 400Q? Thanks

appelm
30th July 2013, 11:38 AM
Its still in prototype stage... There's a thread about it here: http://fpvlab.com/forums/showthread.php?18119-mini-quad-for-FPV

soto48
30th July 2013, 07:18 PM
Oh cool, subs for the thread, Thanks appelm

chatch
31st July 2013, 09:38 AM
i'm thinking 5x3x2 or 5x3x3 props :)

terabyte
31st July 2013, 10:50 AM
please do 3 bladed props, those are a pain in the arse to balance arent they? plus they dont provide much extra lift, or do they?

bicycle
31st July 2013, 01:05 PM
imo 3 bladed props are easier to balance since you don't need to mess with the hub, just work on one blade at a time until two blades are of identical weight and one hangs down perfectly, then work on that one until all 3 are balanced

however with minichatch you probably won't need to balance at all, which is great because i f********* ******* g***gs* ***d*d**** hate balancing props

also 3 bladed props in general kinda suck.

terabyte
3rd August 2013, 05:01 PM
hey Chatch on Spanky can you leave the G10 under the FC alone so that we can tape these instead of using the naze?
http://abusemark.com/store/images/afromini.jpg

PeteDee
23rd April 2014, 09:03 PM
Anyone using a CC3D on their Spanky? Any first hand experience on getting it to fly well would be appreciated.

Currently building one up with SunnySky 2204 2300kv's and 12A Afro's and have a CC3D in the mail.

Thanks

Pete

chatch
25th April 2014, 02:43 AM
Sorry most of the people here use Naze32 controller. I can post PIDs for that one. CC3D seems to be fading in popularity.

You could probably use Juz's settings for QAV250 and CC3D.

PeteDee
26th April 2014, 02:54 AM
Yes well my usual suppliers had no Naze'ss of any kind in stock for a while so ordered a CC3D. Looks like I have found what I need anyway and my flying buddy has sorted his out pretty well today so once my board arrives I should have a head start on getting it in the ballpark.

Cheers

Pete