PDA

View Full Version : Naza M with Futaba FF10CG



PeterPan
19th May 2013, 04:28 PM
Hello all,

Recently I purchased my first FPV quadcopter (TBS Discovery) with Naza M and GPS.
This weekend I am trying to set it up with my Futaba FF10CG transmitter.

First of all I noticed the latest GUI of the Naza M assistance software defers a lot from the published (manuals) GUI. For example I cannot find read or write buttons anymore.

Then I installed the latest Naza M firmware 3.12. Which is developed for the Naza M V-2 but published as well for the V-1 (which is installed on my disco). Unfortunately I am having two major issues:

- it seems I am unable to save settings to my Naza M;
- within the assistance software there is a Tx functionality which shows your stick movements. I am unable to see movements on channel 1 and 2 (ail / elev). On 3 and 4 there's movement but it seems the esc's are not initializing;

Any experience on this issues?

It would help a lot!!!!! Thanks.

PeteDee
20th May 2013, 02:59 AM
What Rx, are you using S-Bus?

I use a 14SG using all functions including gimbal.

Save settings by simply hitting the return button, once the setting goes from red to black it is saved.

Pete

PeterPan
20th May 2013, 03:45 AM
I am using an R6008HS Rx. Hoped it would work with that one. But the simplicity of the s-bus is atracting me a lot. Maybe its time to buy one of these.