TBS 69 FPV Camera

[roberto]

nice

if you had one before ( assuming you didnīt ) you would have found even more

[cabster101]

I didn't find anything from the flight cam. I had to go back through the gopro footage to find everything. It took over an hour to look through 30 mins of video.

[slarys]

Trappy have you got those cams and core back in stock yet?
They were supposed to be in this thursday or friday. Nothing heard about my order yet since a week.

[Trappy]

Dark Side Crew review of the TBS 69 in comparison to 2 other cameras:
http://dscfpv.wordpress.com/2012/05/...cd-had2-tbs69/

[Wise_Man]

The programmer goes into the receptacle that fits, the 4 pin plug goes into the 4 pin receptacle that sits by itself.

You realize that there are two of those 4-pin receptacles on the back of camera, and the 4-pin plug fits into the both. Can I use any one of the 4-pin receptacles?

[cabster101]

Use the 4 pin plug closest the plug for the osd cable. Not the 4 pin plug next to the 2 pin plug. I found out by trial and error.

Does this camera have a MIC? It has a white wire coming from the plug but I haven't tested it.

You realize that there are two of those 4-pin receptacles on the back of camera, and the 4-pin plug fits into the both. Can I use any one of the 4-pin receptacles?

[Wise_Man]

Thanks for the clarification on receptacles. White and black wires are both GND wires.

[Trappy]

You realize that there are two of those 4-pin receptacles on the back of camera, and the 4-pin plug fits into the both. Can I use any one of the 4-pin receptacles?

yes, sorry about that. the new cameras will have the wrong receptacle removed.

Thanks for the clarification on receptacles. White and black wires are both GND wires.

correct, white and black are both GND. connect them together to shield your cable from EMI.

[cabster101]

Thanks for that info.

[Psylokz]

I received my camera today. Easy enough to set up and image looks great through the Dominator goggles. I'm having problems when hooking up to a 14" and 50" television. Image is black and white on both televisions, with crazy interlace issues on the 14". I've read a few posts about NTSC/PAL, does anyone know where the option is in the menu to configure it?