Skylark AAT Suite (Skylark Auto Antenna Tracker + Skylark Trace OSD)

[HAWKS]

I've been running my Trace II on a 3 cell lipo. I know want to run 4 cell lipo on my Tricopter. I done some research on your site but have not come up with an answer. Up to what voltage will the Trace II and Trace III handle?

[skylark]

I've been running my Trace II on a 3 cell lipo. I know want to run 4 cell lipo on my Tricopter. I done some research on your site but have not come up with an answer. Up to what voltage will the Trace II and Trace III handle?

Skylark Trace/Tiny OSD support 3S-4S LiPo battery.

[HAWKS]

Skylark Trace/Tiny OSD support 3S-4S LiPo battery.

Thanks! I'll get busy with some changes on the Tri

[BillyJo]

i just received my Skylark AAT, and i will try to make it work with a Tiny OSD III and i will add the AAT Convert module.
I have a helix 1280mhz and after read a lot of posts here, i'm not sure if this thing will work....

i hope !

did some of you, have try a simple patch antenna 1.3Ghz with the AAT Tracker ? did it work well ? and goes crazy only with the helix ?
thanks !

[BillyJo]

another question did someone or skylark can tell me if i the test software can be used if i'm connected via USB to a Tiny OSD III and i connected the AAT converter module ?

or the test software can only work with the Standard/Trace OSD ?

[ke123]

It goes crazy (for at least some versions of the AAT) with pretty much any metal object near the magnetometer, which is located on the side of the AAT opposite of the cable jacks. You have to use trial and error to situate your electronics and antenna so that it doesn't cause interference to the magnetometer, and once you do it will work well.
cheers

[BillyJo]

ok thanks !

[skylark]

Connect your test software to AAT Convert module directly, doesn't need any OSD.

[BillyJo]

nice thanks !

[Vitamin J]

I'm really happy with Skylark today. I had been having a bad time with my Trace I with inaccurate alt and current readings and finally I sent it back. They replaced it with a newer Trace II/III with a brand new current sensor as well! Thanks a bunch Skylark.