Page 1 of 177 1231151101 ... LastLast
Results 1 to 10 of 1767

Thread: Skylark AAT Suite (Skylark Auto Antenna Tracker + Skylark Trace OSD)

  1. #1

    Skylark AAT Suite (Skylark Auto Antenna Tracker + Skylark Trace OSD)

    Skylark AAT Suite (Auto Antenna Tracker w/ Trace OSD)

    http://www.skylarkfpv.com/store/inde...&product_id=71

    The new Skylark AAT Suite manual has been updated to Skylark website.
    Skylark website-> Support-> Skylark AAT Suite [Download]
    Thanks for all the people who understand and support us.



    Features
    No tools needed for assembly
    Tracks 360 horizontally and 90 vertically
    Include compass
    Free firmware upgrade




    Features
    Easy to install and easy to use.
    5V/12V filtered power for TX/Camera
    PAL/NTSC compatible
    60A current sensor RSSI
    Auto detected | Auto "Setting Home"
    With barometer
    Skylark 10Hz GPS
    Support Skylark Auto Antenna Tracker
    Free firmware upgrade
    http://www.skylarkfpv.com/store/inde...&product_id=74
    AAT convert module for other brand OSD

    http://www.skylarkfpv.com/store/index.php?route=product/product&path=35&product_id=84

    AAT convert module for other brand OSD
    It's very easy, Plug And Play.





    If unsatisfactory results --- then do advanced calibration


    :



    :
    CALIBRATING THE SKYLARK OSD CURRENT SENSOR

    http://www.rcflighttest.com/home/201...urrent-sensor/
    Last edited by skylark; 24th August 2016 at 03:43 AM.

  2. #2
    Navigator hugy's Avatar
    Join Date
    May 2011
    Location
    The Netherlands
    Posts
    386
    1、The new AAT software add a [View in Google Earth] button
    2、Add a [View in Browser] button in new software
    So we can view the aircraft information in a Browser
    http://www.skylarkfpv.com/download/Skylark_AAT_PC.zip



    Last edited by skylark; 5th May 2015 at 06:16 AM.

  3. #3
    I have the Skylark Tiny OSD and it works perfectly. I'm using the old firmware version with NTSC and I have none of the problems Sentry described in his review. I think Sentry's review sample must have had something else wrong with it. Based on my admittedly limited experience so far his problems are not universal to the product as a whole.

    kendall
    Last edited by skylark; 5th May 2015 at 06:00 AM.

  4. #4
    I Like Waffles... SENTRY's Avatar
    Join Date
    Feb 2011
    Location
    Atlanta, GA
    Posts
    10,759
    I will be testing this soon. I actually had a faulty board on my OSD - there are other pilots who had none of the issues I had on their OSD. Furthermore, most of the "issues" I had were responded to quickly - and my requested features were added quickly as well.

    I have not seen a single OSD or tracker that hasn't had firmware upgrades. As an I.T pro I can tell you that the PRODUCTION network is what tests code - not the development network. Just as the MFD has seen firmware updates, so has any other OSD and AT out there. I do not expect it to be perfect out of the box - but I do suspect that Skylark will respond quickly to updates/upgrades and expanded feature sets.
    "I Like Waffles" : FPVLab on Facebook and FPVLab on Twitter

  5. #5

    Instructions

    Skylark AAT Test Tool[Download]

    1、Connect your FPV equipment and power on AAT
    OSD -> TX ---- RX->Skylark AAT
    2、Connect PC with Trace OSD by USB cable
    3、Run Skylark AAT.exe
    4、Select the correct com port what USB cable use, and click the 'Connect' button.
    5、Click 'Reset OSD' button,then waiting for Trace OSD get 'Home' position
    6、Click 'Tracking' button
    7、Check out the status of your AAT
    Note: Please keep AAT [AV PWR] and [AAT PWR] all have power on.


    A way to test the AAT and Trace OSD without Video RX/TX
    Last edited by skylark; 9th July 2012 at 09:06 PM.

  6. #6

    Auto antenna tracker







    Last edited by skylark; 28th June 2011 at 12:14 AM.

  7. #7
    Skylark AAT Test Tool[Download]

    Please remove Video TX / RX, then follow the steps.
    1、Connect your FPV equipment and power on AAT
    2、Connect PC with AAT Module by USB cable
    3、Run Skylark AAT.exe
    4、Select the correct com port what USB cable use, and click the 'Connect' button.
    5、Click 'Reset OSD' button,then waiting for AAT Module get 'Home' position[LED blinking]
    6、Click 'Tracking' button
    7、Check out the status of your AAT
    Note:
    1. Please keep AAT [AV PWR] and [AAT PWR] all have power on.
    2. Make sure 3.5mm Video/Audio cable is plugged in tightly(to determine inserted in the end)


    A way to test the AAT and AAT Module without Video RX/TX
    Last edited by skylark; 29th July 2013 at 09:36 AM.

  8. #8
    I Like Waffles... SENTRY's Avatar
    Join Date
    Feb 2011
    Location
    Atlanta, GA
    Posts
    10,759
    Great!!
    "I Like Waffles" : FPVLab on Facebook and FPVLab on Twitter

  9. #9
    Moderator Derek_S's Avatar
    Join Date
    Feb 2011
    Location
    Charlotte, NC
    Posts
    1,150
    Oh hai,

    I am helping Sentry assemble this baby for some initial testing!
    First we need a tripod from goodwill. Cheap there...
    Click image for larger version. 

Name:	DSC_0005.jpg 
Views:	846 
Size:	96.2 KB 
ID:	1691
    I use the anti-slip mat like you use in cabinets behind the antenna so it wont slip easily.
    Click image for larger version. 

Name:	DSC_0006.jpg 
Views:	820 
Size:	86.9 KB 
ID:	1692
    Click image for larger version. 

Name:	DSC_0007 (2).jpg 
Views:	836 
Size:	84.6 KB 
ID:	1693
    An aluminum bracket for the non-rotating component mounting.
    Click image for larger version. 

Name:	DSC_0008.jpg 
Views:	870 
Size:	83.6 KB 
ID:	1694
    Click image for larger version. 

Name:	DSC_0009.jpg 
Views:	775 
Size:	93.5 KB 
ID:	1695
    Pretty much ready.
    Click image for larger version. 

Name:	DSC_0011.jpg 
Views:	1100 
Size:	88.3 KB 
ID:	1696

    This thing is pretty nice. It sets up easily, and seems to come with most everything. I only need to make a lawmate compatible cable, the one that came with it uses AV connectors instead of 3.5mm rca style. It also appears to support stereo audio operation. (AKA mono with telemetry)

  10. #10
    I Like Waffles... SENTRY's Avatar
    Join Date
    Feb 2011
    Location
    Atlanta, GA
    Posts
    10,759
    We will have this tested this week if we have good weather --- STAY TUNED!!!!
    "I Like Waffles" : FPVLab on Facebook and FPVLab on Twitter

Similar Threads

  1. SKYLARK OSD REVIEW....
    By SENTRY in forum OSDs & Flight Controllers
    Replies: 1194
    Last Post: 14th June 2016, 10:23 PM
  2. Skylark OSD questions - HELP!
    By Clipper99 in forum IFR - Video Link Discussion
    Replies: 14
    Last Post: 22nd February 2013, 03:15 AM
  3. New OSD, Skylark.
    By Bernie in forum IFR - Video Link Discussion
    Replies: 18
    Last Post: 2nd May 2012, 09:38 PM
  4. Skylark 3-Axis Geomagnetic sensor Head Tracker
    By skylark in forum SkylarkFPV
    Replies: 9
    Last Post: 30th March 2012, 11:36 PM
  5. Help with Skylark tiny osd
    By bigmoebbq in forum IFR - Video Link Discussion
    Replies: 7
    Last Post: 18th November 2011, 08:55 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •