I have two ImmersionRC 600mw transmitters a Uno rx and now a Duo rx.
When using one ImmersionRC 600mw transmitter I seem to get ghosting especially noticeable on the white OSD. I at first thought this was my reciever since it was happening on both my ImmersionRC 600mw transmitters in two very different multi copter setups. I purchased a Duo and found the same problem.
I then switched to an old foxtech 200mw transmitter and RC805 rx and I have very little ghosting. In fact you can even see the edge of the black drop shadow on the white font. You'll also notice the color and brightness is more vibrant too.
I also have a pair of bluebeam cloverleaf antennas and switching them from the default ones makes no difference. I also have a range issue where the 600mw really starts to static out when the copter is 100 meters directly above my head.
What could I have messed up with the ImmersionRC setup to cause this? I know this is not normal as I've seen pictures and videos from other peoples ImmersionRC screens that look great and are rock solid. I really need a rock solid signal only 100m above my head with perfect line of sight.