Are there any "How to" videos for wiring up Trace II?

[Navigator53]

I'm going to try and answer my own question for anyone else trying to find the input voltage to tiny & trace.

Looks like it's limited to 5 volts but is capable of reading thru the current sensor 3s or 4s

Interesting, the older style rebranded 4hz model says it has a range of 7.4 to 12 volts.

http://www.hobbyking.com/hobbyking/s...t_sensor_.html

Open this pdf file then Scroll on down http://futurehobbies.com/support/dow...ntenna-tracker

[MASHTON1138]

The Trace and Tiny (any version) both run off of 5v From the RCRX. The CURRENT SENSOR is what HK is talking about. It will read 7 to 12 volt on the old CS the new CS reads up to a 4S.

[Navigator53]

Success, it works!

Now just need a break in the weather to git er' done out in the open

Tight quarters on a Quad, hope everything gets along with each other.

Big Huge Thank you for taking the time to help guys!!!

[durangoflyer]

I recently put a Tiny III on my 4s quadcopter and everything is close on these things but for the ranges we fly (close in) it is working out fine. I have noticed that my GPS will not acquire sat's the first time everything boots up together. I am using one battery for everything with step down buck and LC filter to power video system. I have to hit the reset button and it grabs sat's in a few seconds and I am ready to fly. I recommend a single battery. Less weight, more efficient and less for you to forget and leave plugged in!