Results 1 to 3 of 3

Thread: 1.3 VTX and Video

  1. #1

    1.3 VTX and Video

    Installed a 1.3 VTX on the Stratosurfer with Vector. Have a 800 mw transmitter on plane and a 5.8 Fatshark repeater on the ground station.

    Whenever I give it throttle, I see horizontal lines (engine noise) on the monitor-goggles. Did install a high pass filter on the 1.3 receiver antennae and ferrite ring on the VTX cable. Would a LC filter installed installed on the video cable of the vector clean this up ?

    This is my first 1.3 system and looking to get further out.

    Last edited by Cary Pond; 1st December 2017 at 12:19 AM.

  2. #2
    Sky King j5coat's Avatar
    Join Date
    May 2012
    Location
    Phoenix, AZ
    Posts
    1,122
    Quote Originally Posted by Cary Pond View Post
    Installed a 1.3 VTX on the Stratosurfer with Vector. Have a 800 mw transmitter on plane and a 5.8 Fatshark repeater on the ground station.

    Whenever I give it throttle, I see horizontal lines (engine noise) on the monitor-goggles. Did install a high pass filter on the 1.3 receiver antennae and ferrite ring on the VTX cable. Would a LC filter installed installed on the video cable of the vector clean this up ?

    This is my first 1.3 system and looking to get further out.

    Yes I would add an LLC filter, should clean that up for you.

    Sent from my XT1254 using Tapatalk
    Not an expert, just follow direction well....

  3. #3
    Quote Originally Posted by j5coat View Post
    Yes I would add an LLC filter, should clean that up for you.

    Sent from my XT1254 using Tapatalk
    Did it and it helps !! Put these LC filters on my wings and planes and helps a lot. Good investment !!

Similar Threads

  1. Problem losing video link when video transmitter is touched or vibrated?
    By jjj_85 in forum IFR - Video Link Discussion
    Replies: 8
    Last Post: 29th October 2017, 11:29 PM
  2. Replies: 0
    Last Post: 12th January 2015, 11:46 AM
  3. Video time base corrector to prevent blue screen / free when video signal is lost
    By HeliShredder in forum HD RECORDING / VIDEO EDITING
    Replies: 2
    Last Post: 30th January 2014, 12:24 AM
  4. Replies: 10
    Last Post: 30th June 2011, 10:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •