This ZTW Gecko series ESC

More info: http://www.ztwshop.com/product/ztw-g...brushless-esc/

is a high-quality, efficient brushless electronic speed control. It can operate without the need for a separate receiver battery to power your servos and receivers saving you weight and simplifying your electronic connections (but a separate BEC is required, see below). The Gecko series includes an aluminum heat sink body which is lightweight and helps dissipate heat more efficiently. If you are looking for a top of the line, full-featured ESC at a competitive price, the ZTW Gecko is the logical choice.

FEATURES:

  • Data logging system such as temperature, voltage, current, and RPM
  • Advanced Governor Mode and soft start
  • Power arm protection, over-heat protection, low-voltage protection and lost-signal protection
  • Secondary sub-menu setting by the LCD program card or your PC
  • Super smooth and accurate throttle linearity
  • Support for most motors, including high RPM motors
  • Programmable motor timing
  • Utilizes new smaller MOSFET technology to minimize weight
  • Aluminum finned heat sink
  • Programmable throttle input range
  • Anti-spark circuitry (on HV OPTO models only)
  • ESC firmware and program settings can be updated via PC connection (USB adapter sold separately)

INCLUDES:

  • ZTW Gecko 120A ESC OPTO
  • Pre-installed EC5 Connector (power connector) and 5.5mm bullet (motor connector) for your convenience
  • Instruction Manual

REQUIRES:

  • ZTW 10A BEC/UBEC -

OPTIONAL:

  • ZTW LCD Programming Card -
  • WiFi Programming Module -

PRODUCT SPECIFICATIONS:

Length 65mm / 2.55in
Width 46mm / 1.81in
Height 17mm / 0.66in
Weight 115g
MAX Output Continuous Current 120A
Burst Output 150A (10s)
Battery 5-18NC/6-12Lipo
BEC Output N/A
Power Connector EC5 Connector
Motor Connector 5.5mm bullets