image
Results 1 to 3 of 3

Thread: Powercube Elite Video Help

  1. #1

    Powercube Elite Video Help

    Sorry if this has post somewhere, I have spent hours here to find answers.
    Here is my problem,
    Cam. HS1177 connected to FPVision.
    Rx stick and all, OSD everything looks fine, but there is no image from the video Cam,
    I can adjust everything even included the osd in the cam,
    But for the life of me, could not figure out what to do to get the video feed.
    Also, I will only able to see the menu while plug in Cam 1 port, if I use Cam 2 port see nothing.

    Please help, thanks in advnace

  2. #2
    Make sure cable you are using has correct wire order at the camera, if using supplied cable that came with elite then it is designed for a tbs zero zero cam with a different pinout

  3. #3
    Navigator cracymarc's Avatar
    Join Date
    Jul 2014
    Location
    Germany
    Posts
    144
    1. you will only see something on camport 2, if you have a cam on it and set a switch for camswitch (osd settings->switch settings->osd switch)
    2. you can see the cam osd but nothing else?
    a) try to reset the cam. sometimes the presets are crap
    b) do you have a lenscap on your cam??
    c) have you tryed it with a different cam?

Similar Threads

  1. Elite Bundle questions
    By Telnoi in forum Team-Black Sheep
    Replies: 35
    Last Post: 20th April 2017, 02:17 AM
  2. POWERCUBE ELITE BUNDLE...NO Signal
    By Robomk in forum TBS Support
    Replies: 0
    Last Post: 11th January 2017, 04:10 PM
  3. Finwing Sabre FPV/UAV Elite
    By smoothvirus in forum FIXED WING
    Replies: 33
    Last Post: 15th October 2016, 12:46 PM
  4. Powercube weird noise and very bad video
    By rorist in forum TBS Support
    Replies: 3
    Last Post: 9th April 2016, 04:39 AM
  5. MXP230 Elite V2
    By vzachari in forum GetFPV
    Replies: 1
    Last Post: 23rd June 2015, 11:37 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •