currently deciding what to use/buy for my next build:
*BFF3 + Unify
*Omnibus F4 Pro + Unify
*TBS Elite Bundle
I can find allot of information on most FCs, except for the TBS Elite Bundle. A few things come to mind:
-Where is the xt60 plug soldered? The ESC breakout board does not have pads for it
-Any build vids available? Manuals?
Power goes in at the rear of the PDB.
similis vobis fugere eam furatus!
- Edith Sitwell "I am patient with stupidity but not with those who are proud of it."
I'm working on a complete build video at the moment. It's going to be a full TBS setup; Dquad with the Elite Bundle, TBS bullet proof 25 ESCs, zerozero cam, Crossfire and Mr Steele motors.
The XT60 pads are on the FPV vision board. The Powercube Vision comes with the XT60 and two U.Fl pigtail in SMA and RP-SMA so you can install the one you want based on your antenna.
It's a very nice combo and I really like to be able to access the Vtx and FC settings with the RC Stick commands
Last edited by Oliver Miami; 9th February 2017 at 10:56 PM.
Ah, there it isOriginally Posted by Oliver Miami
I'm working on a complete build video at the moment. It's going to be a full TBS setup; Dquad with the Elite Bundle, TBS bullet proof 25 ESCs, zerozero cam, Crossfire and Mr Steele motors.
The XT60 pads are on the FPV vision board. The Powercube Vision comes with the XT60 and two U.Fl pigtail in SMA and RP-SMA so you can install the one you want based on your antenna.
It's a very nice combo and I really like to be able to access the Vtx and FC settings with the RC Stick commands
Any idea on how many uarts are available?
Being a F3 board I think 3 UARTsAh, there it is
Any idea on how many uarts are available?
I want to get this, but the fact that you need a $10 cable package to connect your LEDs is putting me off.
I am having issues getting the current reading to work. I can see my voltage and battery percentage but the consumed mAh or mAh/min is stuck at zero. Flashed with betaflght 3.1.3 from the TBS Agent. Please help. Thanks in advance!
What version of Core Pro firmware? Version 1.66, 1.67 and 1.70 are working fine for me.
similis vobis fugere eam furatus!
- Edith Sitwell "I am patient with stupidity but not with those who are proud of it."
The latest one from the TBS agent. Let me give you a better scenario because I do not use the vision as the PDB. I have a Kraken 5R with the special TBS PDB. The board gives power to the vision through the brass standoffs touching the PDB. I do not believe that would cause the issue so not sure why I get no reading. I have not touched any settings within the OSD so not sure if I have to switch something on?
Sorry not understanding quite how you have it setup.
similis vobis fugere eam furatus!
- Edith Sitwell "I am patient with stupidity but not with those who are proud of it."
Posting Permissions
Reply With Quote