Eagle Tree simulator (chevron turning with elevator!)

[thestarjet]

Hi guys, recently I started flying a swift for fpv fitted with "guardian" managed to get it all set up ok and the functions are working fine (flew it yesterday).
The issue is when trying to set up RTH and testing using the simulator (funjet selected) the chevron direction is changing using the elevator NOT the roll! I have run "calibration wizard" several times.
I assume if the guardian is fitted and radio mixing disabled (as it must be) then I have the settings in the osd correct? Otherwise the control surfaces would not operate correctly. I must be missing some other setting in the menu but don't see any way of telling the simulator that it's an elevon model apart from selecting "funjet" in the menu.
Any help would be much appreciated

[thestarjet]

Update, tried various settings and now I keep getting "internal error 0306be" .

[EAGLETREE]

thestarjet,

The "funjet" simulated elevon model won't work with the Guardian, since the guardian requires unmixed inputs, and the funjet expects mixed inputs. We recently updated the manual to reflect this. Re the error message, is that happening only when you use the funjet simulator? And, could you please click "Hardware, Choose Recorder Capture rate" and make sure it is set to 10Hz, and click ok? Let me know if this does not clear up the issues.