Page 60 of 61 FirstFirst ... 105058596061 LastLast
Results 591 to 600 of 609

Thread: TBS Software Releases

  1. #591
    Navigator
    Join Date
    Sep 2017
    Posts
    2
    Hello,
    just want to report that upgrading to version 2.07 of the Micro TX breaks the LUA script functionality to adjust pids, etc from Taranis X9D.

    Here the LUA Script source for CRSF
    https://github.com/codecae/betafligh...ised/tree/crsf

    Behavior:
    Opening the telemetry script it used to display both the Crossfire Micro TX and RX, and then a line
    Betaflight 3.2.0:BFF3
    that allows to enter in the actual script to perform FC changes.
    This line is now missing in 2.07, works fine reverting back to 2.06

    Thanks!

  2. #592
    Navigator WDZaphod's Avatar
    Join Date
    May 2013
    Location
    Switzerland
    Posts
    224
    Are there any news reagarding Betaflight 3.2 on a Powercube FPVision? Is BST back alive, and fully working?
    Or is it better to stick with 3.1.7?

  3. #593
    Quote Originally Posted by iKwad View Post
    Hello,
    just want to report that upgrading to version 2.07 of the Micro TX breaks the LUA script functionality to adjust pids, etc from Taranis X9D.

    Here the LUA Script source for CRSF
    https://github.com/codecae/betafligh...ised/tree/crsf

    Behavior:
    Opening the telemetry script it used to display both the Crossfire Micro TX and RX, and then a line
    Betaflight 3.2.0:BFF3
    that allows to enter in the actual script to perform FC changes.
    This line is now missing in 2.07, works fine reverting back to 2.06

    Thanks!
    I have reached out to TBS regarding this issue. They are aware of the issue. If you are not using a QX7, then you really don't need 2.07, anyway. 2.06 should be just fine.

  4. #594
    Navigator
    Join Date
    Sep 2017
    Posts
    2
    I just tested release 2.08 and the RC2 version of the script I am running is working perfectly!
    A big thanks to TBS for fixing the underlying issue and to Codecae for the scripts!

  5. #595
    Navigator
    Join Date
    Nov 2016
    Posts
    24
    TBS Tango Questions:

    I'm on the latest firmware (1.21) and I'm trying to use the Tango for a fixed-wing craft. I'm using the PPM 8 channel mode with an FRSky receiver and XJT module, but my questions are more about the Tango firmware itself:

    1. When I have the model powered up and I'm editing the settings in the mixer, everything works as expected (e.g. if I reverse a channel it properly reverses a servo), but when I exit the settings and go back to the main screen, the settings are not applied. Only if I power down the Tango and power it back up do they actually apply.

    2. Dual Rates - is there a way to choose between the high and low rates? I just see a setting for Dual Rates which scales down the rates for each channel, but I don't see a way to switch back.

  6. #596
    Navigator cracymarc's Avatar
    Join Date
    Jul 2014
    Location
    Germany
    Posts
    173
    1. try a factory reset. this is a knwon bug which should be fixed with the next update

    2. the menu is not a calsic "dual rate" menu. you appl them and can`t activate or disable them by a switch

  7. #597
    Navigator
    Join Date
    Nov 2016
    Posts
    24
    Quote Originally Posted by cracymarc View Post
    1. try a factory reset. this is a knwon bug which should be fixed with the next update
    Is this something that recently broke, or is it something that never worked right? I'd rather not wipe the whole thing.

  8. #598
    Navigator cracymarc's Avatar
    Join Date
    Jul 2014
    Location
    Germany
    Posts
    173
    it have been broken in one of the latest firmware´s.
    the reset helps in 90% of all cases

  9. #599
    Navigator
    Join Date
    Aug 2016
    Posts
    23
    Is anyone else having an issue connecting TBS agent to colibri race FC

  10. #600
    Navigator WDZaphod's Avatar
    Join Date
    May 2013
    Location
    Switzerland
    Posts
    224
    No, just Agent to FPVision with newer Firmware Level.
    What's your prob? For the Firmware Flash by Agent you need to press the Boot-Button while connecting USB. But you can also use the Betaflight Configurator for flashing a new Version

Similar Threads

  1. FAA Releases B4UFLY Smartphone App
    By Papa Echo in forum sUAS LEGISLATION
    Replies: 11
    Last Post: 26th January 2016, 02:22 PM
  2. Lumenier releases "CS-600 Super" FPV Camera
    By timnilson in forum LUMENIER
    Replies: 52
    Last Post: 1st October 2014, 10:41 PM
  3. FAA releases 1,000's of pages of drone records
    By e- chaser in forum INFORMATION BOOTH
    Replies: 1
    Last Post: 22nd July 2012, 02:07 PM
  4. AUVSI Releases UAV Code of Conduct
    By Sgt. Schultz in forum INFORMATION BOOTH
    Replies: 0
    Last Post: 8th July 2012, 03:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •