Page 59 of 60 FirstFirst ... 94957585960 LastLast
Results 581 to 590 of 593

Thread: TBS Software Releases

  1. #581
    MrTakeNoPrisoners PeteDee's Avatar
    Join Date
    Apr 2013
    Location
    Canberra, Australia
    Posts
    3,100
    Quote Originally Posted by helio View Post
    Where do I find the change log or release notes for the TBS Crossfire firmware "XF TX BETA v1.65"?
    It is in Agent in the beta listing, click on "Release Notes" and scroll to the bottom of the page.



    ------------------------
    Beta Release Notes
    ------------------------


    Please send feedback to teamblacksheep.beta@gmail.com or post here:
    http://fpvlab.com/forums/showthread....tware-Releases


    V1.65 2017-05-30
    - improved: CRSF support ( KISS FC telemetry and settings )
    - fixes: some CRSF telemetry frames


    V1.63 2017-02-15
    - added: CRSF parameters support
    - fixed: Increases CRSF channel range


    V1.62 2017-01-06
    - added: Crossfire TX non-inverted CRSF support for Graupner remotes (MZ-12 - MZ-24)
    - added: CRSF support for all receivers. Crossfire micro V2 and diversity support also CRSF telemetry.
    The receiver can be connected to betaflight sending RC and receiving telemetry using
    CRSF (betaflight 3.1.0 or higher required). Telemetry can be streamed to any OpenTX Remote.
    - improved: MAVLink library updated
    - imporved: OLED Menu text for better understanding
    similis vobis fugere eam furatus!

    • Edith Sitwell "I am patient with stupidity but not with those who are proud of it."

  2. #582
    Quote Originally Posted by jifka View Post
    Right, I suspect it has something to do with TBS's support for the XJT module on SBUS since using PPM lets you access all of the channels. I just don't want to fly using PPM.
    Hello again, I bought FrSky XM+ receiver which is SBUS-only tiny receiver and I get all 10 channels with it using the same TX.
    So if you don't need PWM channels on the receiver I think this is a workaround. Also it is so tiny and light and also cheaper, I will use it as my daily receiver.

  3. #583
    Navigator
    Join Date
    Aug 2016
    Posts
    20
    anyone knows whats the License update in TBS Agent is for?

  4. #584
    Navigator
    Join Date
    Dec 2015
    Location
    North Yorkshire Moors
    Posts
    52
    Guessing it is for the FLARM aircraft anti collision update for CF. You need a license for each diversity receiver you want to use it on.

  5. #585
    FPV Crew Chief kalikraven's Avatar
    Join Date
    Sep 2012
    Location
    Gainesville/Ocala Florida
    Posts
    1,255
    If the FLARM was fully integrated with ADSB then I'd consider an upgrade. Just not worth it for me in the USA with more ADSB vs Flarm.

  6. #586

    Unhappy CRSF Channel 1 / Throttle Spiking & low RSSI

    XF TX BETA v2.06:
    Anyone seen spiking RC inputs (only ch1 - throttle affected) with the crossfire micro tx and Rx? Running beta v2.06 firmware (can't downgrade to non-beta, see pic). Running iNav (latest stable), CRSF protocol, 50hz update rate (tried 150hz too). It seems to only be affecting throttle (ch1 I think).
    It seems to be in relation to the RSSI.

    Not sure how the RSSI was dropping so much since I was within 50 metres... (RSSI is channel 8, configured via the LUA script)

    Setup:
    FrSky Taranis w/ TBS Crossfire Micro Tx (tried 25mw and 100mw)
    TBS Crossfire Micro Rx (Running 2.06 beta) - Mounted at the top of the frame horizontally with antenna tubes (same as Tx antenna). Rx unit mounted about 2cm above the Unify Pro, right next to the FPV Cam.
    TBS G2 Frame
    TBS Unify V2 & Runcam Eagle
    Matek PDB for cam/unify & dual 220 16v low ESR Caps out outputs
    RTFQ Omnibus F4 Pro (Running iNav - checked the source, the RC control is the same as BF/CF)
    RTFQ 30A 4-in-1 ESC (Running Oneshot42, tried Oneshot124 too)
    RTFQ GPS Ublox M8N & Compass
    1000uf 25v Low ESR Cap on LiPo input
    Emax RS2205 2300kv, HQ 6x4x3 props (I know! TBS Endurance motors going back on when I can get hold of 7" props)
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	rssi-crsf.jpg 
Views:	50 
Size:	163.4 KB 
ID:	77391   Click image for larger version. 

Name:	rssi-crsf2.jpg 
Views:	37 
Size:	171.8 KB 
ID:	77392   Click image for larger version. 

Name:	tbsagent.JPG 
Views:	46 
Size:	51.4 KB 
ID:	77393  

  7. #587
    Quote Originally Posted by SirVodkat View Post
    XF TX BETA v2.06:
    Anyone seen spiking RC inputs...
    Update: I've tried v2.05 BETA on the bench (props off), same issue... Channel 1 spiking when RSSI is low. I will try flashing Cleanflight now to see if it still does it.
    Click image for larger version. 

Name:	bench2.jpg 
Views:	31 
Size:	191.2 KB 
ID:	77394

  8. #588
    Quote Originally Posted by SirVodkat View Post
    XF TX BETA v2.06:
    Anyone seen spiking RC inputs...
    I cant seem to replicate the fault in Cleanflight 2.1.0 so it must be iNav!
    Click image for larger version. 

Name:	cleanflight-CRSF.jpg 
Views:	62 
Size:	187.7 KB 
ID:	77395

    EDIT: I'm getting this in Cleanflight too... So this must be either the Crossfire system or something hardware related... I'll keep digging. Anyone else seen anything like this?
    Last edited by SirVodkat; 28th August 2017 at 05:45 PM.

  9. #589
    Navigator
    Join Date
    Aug 2014
    Posts
    525
    Quote Originally Posted by SirVodkat View Post
    I cant seem to replicate the fault in Cleanflight 2.1.0 so it must be iNav!
    Click image for larger version. 

Name:	cleanflight-CRSF.jpg 
Views:	62 
Size:	187.7 KB 
ID:	77395

    EDIT: I'm getting this in Cleanflight too... So this must be either the Crossfire system or something hardware related... I'll keep digging. Anyone else seen anything like this?
    Did you find the problem ? I can't see this being CF or Inav etc.. I would look to your hardware, you must have another Quad or something to test with.

  10. #590
    Quote Originally Posted by Marv View Post
    Did you find the problem ? I can't see this being CF or Inav etc.. I would look to your hardware, you must have another Quad or something to test with.
    Yeah I've borrowed someone else's micro Rx and the problem went away. Must be hardware (the micro rx) so I'll be sending it back.

    Sent from my SM-G930F using Tapatalk

Similar Threads

  1. FAA Releases B4UFLY Smartphone App
    By Papa Echo in forum sUAS LEGISLATION
    Replies: 11
    Last Post: 26th January 2016, 01:22 PM
  2. Lumenier releases "CS-600 Super" FPV Camera
    By timnilson in forum LUMENIER
    Replies: 52
    Last Post: 1st October 2014, 09:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •