I had a chance to test fly my new setup this evening. Went well, but I need to do some trimming on the TX and adjust CG a bit. I am using the same frame, flight controller, ESC's, radio gear and props.
Carbon Bird 775kv motors
4s 45c 2200mah pack
RMRC 1 gram 520tvl camera
RMRC 800mw 1280 TX
Step down regulator & LC filter
I mounted the camera on gel gyro tape and the picture is rock solid with no vibration waves. I put the foam back on the landing gear for the first few flights as I am really rusty.
I lift off at slightly under 50% throttle and the power is nice. I logged about 7 mins landing at 3.82v per cell.